All posts by fozzy
Below are all of fozzy's postings, with the most recent are at the bottom of the page.
jb38: Had a break through! after moving the Sony TV to the PC aerial and tuning without a reset all the missing channels (coms4?) appeared and are still viewable when returned to the original aerial. However the PC TV is still unable to find the missing channels (coms4?)on either aerial any ideas?
I have the ability to change the start end frequency then scan frequency and range separately what feq range should i be using? by default its set to scan Mendip UK from 746200khz to 842000khz is this the problem? as I have no idea.
Thank you again for your help and patience.
| link to this comment |
jb38:I didn't explain properly it is a different supply from the same aerial so quite how it made a difference I don't know. The aerial is a high gain that's about all I know about it with a booster fitted at the closest point possible in the loft.
The PC based card is a TBS6205 DVB-T2/T/C Quad TV Tuner PCIe Card
TBS6205 DVB-T2/T/C Quad TV Tuner PCIe Card
Running DVB Pro DVB viewer - the best PC software for TV and Radio reception - Home which with help now on the forum Ive updated the Mendip manually to using TransEdit- Main Window which maybe of use to you or others. Unfortunately it now seems that the dvbpro software as of yet doesn't support these new format of tv streaming and from what Ive read no PC software does which I find astounding.
Thank you kindly again for all your help its been invaluable, if and when there is any advances in the software availability I will update you.
| link to this comment |
js: Thanks very much for the information!
Could you please go into a little more detail as Ive done all you've said and Im not seeing the new file listed in the transedit column, if I try to load it manually it says unrecognised file type. Am I supposed to make the file using notepad? and what format should it be saved in? as everything Ive tried has no effect.
| link to this comment |
js: Fantastic!
I install VLC and the file worked from the go, I then used your initial posted file along with VLC and all services work.
If any updates for services are available I'd be most grateful.
Thank you again for your input its very much appreciated!
| link to this comment |
js: Thanks for the update Ive finally got it working and recording, shame there no timer recording facility.
Do you know if the other channels work ok as Ive tried them and they either dont work or stop after a few minutes I'm assuming they are pay for view.
Thank you again for your help its very much appreciated.
| link to this comment |
Page 2
Wednesday 2 March 2016 1:37PM
Manchester
jb38: Thanks for the response, unfortunately I did a reset and re-tune prior to the post so I know that's not the problem, could it be to do with mobile phone masts? this is frustrating at least its narrowed down now.