menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

How signal stregth, quality and bitrate relate

What is the relationship between the "signal strength", "signal quality" and the pixilation and stuttering he got when trying to record from various Freeview channels onto a personal video recorder (PVR), computer (via a USB Freeview adaptor) and a DVD-R recorder.

What is  the relationship between the  signal strength ,  signa
published on UK Free TV

I have been asked about the relationship between the "signal strength", "signal quality" and the pixilation and stuttering he got when trying to record from various Freeview channels onto a personal video recorder (PVR), computer (via a USB Freeview adaptor) and a DVD-R recorder.

In summary, the power of the transmissions has nothing to do with it at all.  This simply affects the distance from the transmitter that the services can be received. Each multiplex provides either 18Mb/s (16QAM, mux 1, B, C and D) or 24Mb/s (64QAM mux 2 and A), which is used to provide up to 8 TV channels by using "statistical multiplexing".  This means each TV channel is provided using around 3Mb/s, which is the value you found. (Mb/s is megabits per second, so 1Mb/s is a million bits per second and so on. Computers usually measure file sizes in bytes, which are 8 bits. So to record one second of a 8Mb/s transmission requires 1MB or megabyte.)

When the signals are increased in strength at switchover they will all be changed to 64QAM providing 24Mb/s.

Trial recordings

Trial records were made 8km from the Angus transmitter.

Channel

Signal strength (max 6)

Average bit rate Mb/sec

5 minutes file size MB

Resolution

Multiplex and mode

BBC 1

3/6

3.9/3.28

154.5/128.6

720 x 576

1, 16QAM

BBC 2

6

3.21

125.5

720 x 576

1, 16QAM

ITV 1

4

3.25

124.8

704 x 576

2, 64QAM

C4

3/5

2.52/2.38

98.5/94.9

704 x 576

2, 64QAM

C5

5

2.52

100.7

720 x 576

A, 64QAM

BBC 3

6

2.83

111.5

720 x 576

1, 16QAM

ITV 4

3/5

1.94/1.95

77.3/80.2

544 x 576

2, 64QAM

Film 4

6

1.76

69.4

720 x 576

D, 16QAM

More 4

4

2.54

99.1

544 x 576

2, 64QAM

Let me explain why these results happen.

There is a huge amount of difference between the way analogue and digital transmission systems work. 

Analogue and digital

On analogue, the picture is transmitted by a system that scan from left to right, row by row down then up the TV screen.  At the start of each scan line, a "very high" signal is transmitted.  This means that even if the signal gets some interference, the TV can recover what it was doing at the start of the next line.

The digital TV pictures are first broken into three components, broken into 8x8 blocks, the blocks are then encoded using fast Fourier transformations, scaled by a compression value, and run-length encoded to create a stream of 1s and 0s.  Then up to eight of these streams of 1s and 0s are multiplexed together to produce no more than (but as close as you can get by dynamically adjusting the compression value) 18Mb/s or 24M/s.

These are then transmitted using a system called COFDM, which uses a system called "forward error protection" to hopefully deliver the bitstream without a single error to the receiver.  However, if a SINGLE error occurs, it can be quite some time before it can be corrected for.  This is because a single bit can represent many different values: the TV channel, a value of 1, 2, 4, 8, 16, 32, 64 or 128 in a single byte, the number of repeats of another value and so on.

This means that if you CAN get an error-free reception of the MPEG-2 (as it is known) bitstream, to record or playback this bitstream is a simple matter of copying it to storage and then reading it back again.

However, if you do not get PERFECT reception, then if you record this bitstream onto a DVD or the hard disk drive in a PVR, then it will pixelate and stutter at points where the bitstream was corrupted.

The "standard" picture size for MPEG-2 (called Main Profile at Main Level, MP@ML) is 720x576.  This can represent a picture in the old-fashioned 4:3 TV screen, or the modern 16:9 widescreen layout.  On a 625-line analogue TV system, only 576 lines are used for picture, the rest is for Ceefax/Teletext and other signalling.

Of the 720x576 pixels only 702 horizontal pixels are designated for viewing, the other 18 being a "bleed" so the recording can be scaled for broadcaster purposes.  ITV (and Channel 4 sometimes) use an "off-standard" system of using only

544 horizontal pixels (ie three-quarters width) that provides additional data compression benefits, but with a loss in the picture quality.

Bit rate

The bitrate is determined by several factors.

Firstly, there are some channels that cannot be statistically multiplexed, these being BBC ONE, BBC TWO, itv-1 and Channel 4.  This is because they are different on each transmitter, so these channels have a "reserved" (ie, maximum) bandwidth.

Secondly, there is the nature of the material.  Static pictures and cartoons compress much better than unpredictable material.  Strobe effects are the worst, followed by panning shots of crowds watching football.

Thirdly, material that is live and has to be compressed in real-time produces more data than archive material that can be compressed with more computing time.  This is why Films on DVD look better for the same bandwidth than something you might record.

Fourth, the amount of bandwidth the broadcaster wishes to use, because higher compression results in more choice of channels, but with reduced picture quality.

Fifth, the ratio between three types of frame: the "full picture" frames that are broadcast periodically (every second frame to several seconds apart) and the "forward predication" and "backward prediction" frames that consist of the difference from the "full picture" frames.

So, this means:

  • Signal strength has nothing to do with the bitrates;
  • Channels on the same multiplex can use different bitrates;
  • File size is directly proportional to the bitrate (eight bits in a byte and so on)
  • Momentary interference that is not correctable by the forward error correction (say from a GSM phone or two-stroke engine) takes at least one frame and often as many a few seconds to correct for.
  • A single bit error can occur without any change in the signal strength, as it is function of the interference level, not of the original transmission.

Conclusion

If you conclude that the "claim that switching to digital TV is an improvement in viewing quality is not substantiated" is quite correct.  If you had prefect or near-perfect analogue reception, digital TV will decrease the picture quality.  This is because digital TV provides more services using the same transmission frequency.

However, many people are unable to get PERFECT analogue reception, but will get PERFECT (uninterrupted bitstream) Freeview reception.  For these people, the picture quality will improve.

But, Freeview reception where the "bit error rate" is high will result in pixilation or picture freezes.  In this situation, you should:

  • improve the quality of the digital signal received by the aerial by using a Class I CAI-marked digital aerial;
  • then, use a masthead amplifier to boost the level of the digital signal, not the background interference;
  • then, use satellite grade co-axial cable to connect the aerial to the set-top box;

So, in conclusion, Freeview reception for recording will only work if you can receive the bitstream with no errors.  This depends more on the level of interference, rather than the signal strength.

I hope this explains everything.



Help with Which system?
Can I use an existing sky dish with a freeview box? and if so can the two servic1
what is the difference between normal Co-axial cable and satellite grade? Can I2
i will never be able to get Sky reception (my house is surrounded by trees) an3
Do I need to get an aerial or can I connect my old sky dish straight to an aeri4
Why are many channels (such as TCM) on fSfS or Freesat but not on Freeview?5
In this section
Freeview+ up 120% in December 20081
Freeview PC2
Ten reasons for buying a personal video recorder3
Sky+ ten quid monthly fee abolished4
Freeview Playback announced5
Free Media Center PVR!6

Comments
Saturday, 22 March 2014
J
jb38
sentiment_very_satisfiedPlatinum

9:02 PM

Chris: Its really a case of whether or not the repositioned aerial has been aligned facing in "exactly" the same direction and mounting polarity as before? as what you have reported is inclined to suggest that it hasn't been, or alternatively that you are located in an area where the signal level received from the transmitter can vary over a few feet or so, something that's not exactly uncommon in certain areas.

A couple of "Mumbles" SA3 test codes tried out (5AS / 4DH) indicated that your reception could be (as mentioned) from the Wenvoe (horizontal polarity) transmitter @ approx 31 miles or alternatively the Kilvey Hill (vertical polarity) transmitter @ approx 4 miles, signal levels from both being good dependant on your exact location.

However, more precise information can only really be supplied with knowledge of the post code applicable to the premises being referred to, or alternatively one from somewhere nearby such as a shop / post office.

By the way, and aerial such as a DAT45 "has" to be precisely aligned to avoid the possibility of erratic reception quality being experienced due to the narrow pick up acceptance angle of this type of aerial, Log periodic's being superior in areas where minor fluctuations in the angle the signal is being received at is liable to occur.

link to this comment
jb38's 7,179 posts GB flag
Select more comments
Page 4

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.