menuMENU    UK Free TV logo TV

 

 

Click to see updates

Problems with Sagem and TUTV Thompson PVRs

TUTV Thompson and Sagem PVR66160T UK, PVR6680T UK, PVR6240T UK (Argos), PVR6280T UK, PVR62160T UK boxes effected.

TUTV Thompson and Sagem PVR66160T UK, PVR6680T UK, PVR6240T UK
published on UK Free TV

There have been many reports of problems with Thompson TUTV "Anytime" personal video recorders.

Top UP TV have been telling people that this is due to work being done on the transmitter. This seems to be the case if there is work on the transmitter or not.

A typical description of the problem is this Over the past week or two on changing channels the screen would go black and it would take 5 or 6 seconds maybe more for the selected channel to show, some channels would not be available no sound or picture just black screen and the logo for channel not available at the top of the screen. On Friday I decided to scan the channels in an effort to improve the channel change time and general performance. From that time only 4 BBC channels now available. However I have a TV with built in Freeview and the Freeview channels are available but missing are the Top Up TV channels.

Update

Bryan Jones said: "I've just spoken to TUTV and there response is that the digital switch-over is starting to take place and the old software for the Thomson boxes is kaputten new software is being developed and they hope to be up and running soon in the meantime i was offered a free month, this in the NE of England"

Which is a little odd, as switch-over will not be starting in the Pontop Pike region for another FOUR YEARS. It is hard to know how these boxes that can no longer receive the Top UP TV Service will be able to download the "new software being developed".

At the same time there seems to be a probem with these Sagem boxes: PVR66160T UK, PVR6680T UK, PVR6240T UK (Argos), PVR6280T UK, PVR62160T UK

This seems to be related to the software provided over-the-air to these boxes in the last week, version "0.4.7 MH", however the boxes that do not work seem to have version "0.4.5 MH"

It is always worth trying this My Freeview box has no EPG, is missing Film4, Channel 4+1, no sound on ITV3 or the channel line up is wrong procedure.

The problems may relate to changes made in Freeview mode change in Scotland, NI and the North.

Some people found doing a manual tune for multiplex 1, and the using the menus on the receiver to force a manual download of the software worked, but the transmissions were from 14/07/08 until 9am 19/07/08.



Help with Which system?
Can I use an existing sky dish with a freeview box? and if so can the two servic1
what is the difference between normal Co-axial cable and satellite grade? Can I2
i will never be able to get Sky reception (my house is surrounded by trees) an3
Do I need to get an aerial or can I connect my old sky dish straight to an aeri4
Why are many channels (such as TCM) on fSfS or Freesat but not on Freeview?5
In this section
BBC sets out plan to inform, educate and entertain during unprecedented times1
Why are there so many +1 channels on TV?2
Channel 4 would like to turn Sky "retransmission fees" into programming3
The BBC wants to stop paying Sky ten million pounds a year for EPG listing4
BBC "Delivering Quality First" changes to transmissions5
Broadcasting territorial exclusivity with a decoder card is contrary to EU law 6

Comments
Monday, 6 May 2013
J
jb38
sentiment_very_satisfiedPlatinum

12:19 AM

Pat oaks: "If" your Freesat box is a PVR (recorder) type then try swapping the two inputs from the dish over, although if its just a receiver then check the "F" connectors at each end of the coax cable by unscrewing the large gland nut that locks them onto the receivers (or dish LNB's) input, followed by carefully unscrewing the body of the plug from the coax to check if any water has entered the connector, finally screwing the connector back onto the coax "after" having ensured that no strands of the braiding are touching the middle core of the cable.

link to this comment
jb38's 7,179 posts GB flag
Sunday, 28 January 2018
K
Kirsten
4:54 PM

My Thompson tutv box won't boot up, after a power cut it just says please wait and then fail, does this mean the box is dead?

link to this comment
Kirsten's 1 post GB flag
S
StevensOnln1
sentiment_very_satisfiedPlatinum

7:06 PM

Kirsten : Try unplugging the box from the mains for 5-10 minutes, then plug it back in and try switching it on again. If that doesn't work then the box probably is dead.

link to this comment
StevensOnln1's 3,605 posts GB flag
Wednesday, 25 March 2020
A
Andy Bell
4:38 PM

My Sagemcom RT190-320 box has just locked up when I tried to set a program to record, and now won't boot past the 'init' stage. I realise this is quite an old device, but it was working fine so does anyone have any suggestions to get it to boot? I think the last software update was about 4 years ago, but can anyone point me to where I can download it again and try to load from USB stick as the box boots up, in case that resets it?

Thanks

link to this comment
Andy Bell's 1 post GB flag
Thursday, 26 March 2020
C
Chris.SE
sentiment_very_satisfiedPlatinum

1:47 AM

Andy Bell:

In the absence of any other response or suggestion, don't know if you can find anything of any help at Search Products Sagemcom Support
I'd hope someone who knows about this may post.

link to this comment
Chris.SE's 4,101 posts GB flag
Select more comments
Page 2

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.