menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

Mendip transmitter - January 11th retune required

If you use the Mendip transmitter (but not the relays) for your digital television reception, you will need to retune - again - on January 11th.

If you use the Mendip transmitter (but not the relays) for your
published on UK Free TV

At the moment, viewers using the Mendip transmitter are unable to subscribe to Sky Sports 1 and 2 via BT Vision and/or Top Up TV - see BT Vision, TUTV, Sky Sports 1+2 and the Mendip transmitter - ukfree.tv.

To deal with this, on 11th January 2011, Multiplex D will change from being broadcast on C59+ in 16QAM mode, and switch to be the "normal" Arqiva B multiplex (10kW ERP) on C67 in 64QAM mode.

It will stay there until it moves to C52 on 28 September 2011. This date also sees Multiplex COM4/SDN move from C62+ to C48 and COM5/ARQA move from C56+ to C56.

In summary - if you use Mendip - even if you don't use Sky Sports, you must retune again on 11th January 2011.

When you retune - use a "first time installation" or do this - My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong

Note: This event is not part of the digital switchover process, and is not being managed by Digital UK, but by Arqiva and ITV.

If you have any questions, please call ITV on 0844 881 4150.



Help with TV/radio stations?
Can I receive British Eurosport for free?1
Can I receive DAB radio too?2
Can I get E4 with this service?3
Is sky|one going on Freeview?4
Can I watch for free Financial channels such as CNBC or Bloomberg?5
In this section
The lower the channel number in the guide, the more viewers it gets ... Right?1
New Freeview and Freesat channel TruTV to start soon2
Why does BBC Worldwide not make more profit for the Licence Fee payer?3
How do the new ITV local news regions compare with the BBC?4
A short history of Border TV5
Want more local news? ITV is going to provide it6

Comments
Sunday, 23 January 2011
Les Nicol
sentiment_satisfiedGold

3:44 PM

ITV Player on other "Freesat" receivers will display - "The service is not currently available on this device" (10002).

link to this comment
Les Nicol's 991 posts GB
Monday, 24 January 2011
L
Lorraine
8:33 AM

Hiya I have a Sony tv downstairs with freeview and a humax freeview recordable box. The chnnels are all fine with these, however the sony tv I have in my bedroom has lostvariouse chnnels, including channel 12,18,21 and a few others. The channel numbers were listed on the screen but not tuned but, when I retuned the tv, they have completely vanished, any ideas please.

link to this comment
Lorraine's 1 post GB
Wednesday, 26 January 2011
Friday, 28 January 2011
R
Ryland
3:35 PM
Weston-super-mare

Last year Humax sighed a contract with Sky to receive Sky thru there HD-FOX T2 box. I think this was going to be thru the Internet. Gone very quite on this contract.

link to this comment
Ryland's 2 posts GB
N
Nikki
9:42 PM
Chepstow

Brian, Have done this and done a manual retune as otherwise we pick up the welsh channels and BBC West goes onto 800. I have checked the signal strenght wish is excellent. I had problems after the original retune and had to wait for an upgrade from Humax for my PVRto download. 6 months !!! So suppose will have to wait again if this is the problem. If I switch the machine off at the mains and then back on again the sub titles reappear

link to this comment
Nikki's 5 posts GB
Sunday, 30 January 2011
C
Christopher
9:33 PM

Dave Spencer: Thanks! It worked
I've had problems with my Humax and the Mendip Transmitter. I could only get itv, ch4 & 5 through the 800 channels (coming from wales, and I'm i Chippenham!!) Retunes as advised made no difference. Quality of advice from professionals here is pretty lame!

I did as Dave Spencer suggested. on a second retune, kept the arial out till just under half way through the retune and popped it back in during the retune. I now have all my channels on all the right places with no signal problems at all.

Thanks

!

link to this comment
Christopher's 3 posts GB
Monday, 31 January 2011
Tuesday, 1 February 2011
D
David
9:34 AM
Chepstow

Firstly, thanks for an excellent website.
I am on the fringe of both the Mendip & Wenvoe transmitters. I have a roof mounted horizontal 12 element Yagi pointed at Mendip and a loft mounted horizontal 8 element Yagi pointing at Wenvoe. Both feeds are combined and fed into an Antiference splitter box feeding four outlets in various rooms in the house.

I sat down yesterday and went through a full scan of all channels. The channels shown on this site to be broadcasting at 100kw on both transmitters are showing full strength / good quality. Channels 56 & 62 from Mendip, although broadcasting at 10kw and showing lower strength and quality are watchable without problems. Channel 67 from Mendip, broadcasting at 10kw, is showing low strength quality and is unwatchable most of the time. Channels 42,45 and 49 from Wenvoe, although transmtting at 50kw are showing low strength / quality and are unwatchable (This I suspect is due to the small aerial mounted inside the loft).

My questions are therefore this.

1. Can I expect the Mendip channels that are currently being transmitted at less than 100kw to be increased to 100kw when switchover completes in all adjoining areas?
2. Is the fact that some of the Mendip 10kw channels (C56,C62) are OK, whilst C67 is not, because C67 is at the top of the frequency band? If so, should I grit my teeth and wait for it to move to C52 in September or would a better aerial resolve this?
3. Can I expect the Wenvoe channels that are currently being transmitted at 50kw to be increased to 100kw when switchover is complete?



link to this comment
David's 3 posts GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.