Menu buttonMENU    UK Free TV logo Help!
securesearchsettings

 

 

Click to see updates

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?

How do I change the RF output channel on a Sky Digibox?
published on UK Free TV

Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]



Then press [4] to go to the RF output menu.



You can now change the value so that it does not clash with an analogue TV channel or a Freeview multiplex.

HD and "new EPG" boxes

If you have a HD box, press [SERVICES] button and then press [0] [0] [1] then [SELECT]. Nothing is shown on the TV screen until you press the Select button.

Then use the [RIGHT] arrow button on the remote until this screen is shown, and press SELECT to change the values:



All questions
What angle should the dish be set at to recieve english programmes? 1
My satellite system gives me all sorts of channels including mostly German chann2
Would I be able to Get Sky Freeview on Kos? If Yes what size dish would I need?3
Is there any way i can use my Sky service in Pakistan?4
I use a UK sky card to receive Uk TV in Australia?5
In this section
Can I use my ex-contract sky digital satellite receiver to get Freeview channels1
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau2
Can I stop paying Sky and use my satellite receiver to get Freeview ?3
I have a Panasonic TV with integrated Freeview how can I record Freeview channel4
My Sky box has a "no signal message" - what do I do?5
I have split the signal from my satellite dish and now nothing works.6

Comments
Saturday, 16 June 2018
MikeP
3:26 PM

Wendy:

Glad you got some service. However, Channel 68 is very likely to suffer from interference later as it is in the range used now and in the future for 4G and maybe 5G mobile serices, so it is best to avoid anything above channel 60. It is also wise to avoid any of the channels used by transmitters whose signals may reach your location. That is why I suggested using channel 34 as none of the transmitters in your area use that channel.

As I stated, it is better to use an HDMI lead if at all possible, else use a SCART lead if the TV and Sky box do not have HDMI sockets.



link to this
MikeP's 2,327 posts Platinum Platinum GB
Tuesday, 28 August 2018
L
Liam
11:15 AM

My sky box will not record or give synopsis of programmes since I connected an I/0 modulator to rf output can you help me..?

link to this
Liam's 1 post GB
MikeP
11:20 AM

Liam:

Why did you connect the I/O modulator to an RF output? That output is meant to be connected via coaxial cable to a TV set/STB.

Does removing the modulator restore the services?



link to this
MikeP's 2,327 posts Platinum Platinum GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.