Freeview reception at NP13 3BD
For reliable and stable Freeview reception, you need an unobstructed path between the TV aerial on your roof and the digital TV transmitter. The map below shows the transmitters predicted to provide a signal at this location.
You can click on any transmitter symbol to show the coverage area as a green overlay on the map. Double click on a transmitter symbol to go to the transmitter information page.
You can also view the ten closest potential '4G-at-800' mobile phone masts within 1.5km of the selected location - these masts may be used for 4G-at-800 mobile broadband services from 2013-2015.
These icons show the potential locations for 5G-at-700MHz services that may interfere with Freeview reception. For actual mobile device reception prediction (at 800-960MHz and 1710-2170MHz) see these phone operator's mapping sites: Three O2 EE VM
You can click on any transmitter symbol to show the coverage area as a green overlay on the map. Double click on a transmitter symbol to go to the transmitter information page.
You can also view the ten closest potential '4G-at-800' mobile phone masts within 1.5km of the selected location - these masts may be used for 4G-at-800 mobile broadband services from 2013-2015.
map is loading, please wait...
There are 2 mobile phone masts within 1.5km of NP133BD (page shows closest 10)What do the map symbols mean?
EE, Multiple operators, O2, 3, Vodafone, location on line-of-sight, Selected location, Freeview transmitter, Freeview light transmitter, Engineering/fault today.These icons show the potential locations for 5G-at-700MHz services that may interfere with Freeview reception. For actual mobile device reception prediction (at 800-960MHz and 1710-2170MHz) see these phone operator's mapping sites: Three O2 EE VM
Predicted Freeview channel list
| 1 | BBC One (SD) | Blaina Wales | PSB1 | |
| 2 | BBC Two | Blaina Wales | PSB1 | |
| 5 | Channel 5 | Blaina Wales | PSB2 | |
| 6 | ITV 2 | Blaina Wales | PSB2 | |
| 9 | BBC Four | Blaina Wales | PSB1 | |
| 10 | ITV3 | Blaina Wales | PSB2 | |
| 13 | E4 | Blaina Wales | PSB2 | |
| 14 | Film4 | Blaina Wales | PSB2 | |
| 15 | Channel 4 +1 | Blaina Wales | PSB2 | |
| 18 | More4 | Blaina Wales | PSB2 | |
| 23 | BBC Three | Blaina Wales | PSB1 | |
| 26 | ITV4 | Blaina Wales | PSB2 | |
| 28 | ITVBe | Blaina Wales | PSB2 | |
| 30 | E4 +1 | Blaina Wales | PSB2 | |
| 35 | ITV1 +1 | Blaina Wales | PSB2 | |
| 46 | 5SELECT | Blaina | PSB3 | |
| 101 | BBC One HD | Blaina | PSB3 | |
| 102 | BBC Two HD | Blaina | PSB3 | |
| 103 | UTV HD | Blaina | PSB3 | |
| 103 | STV HD | Blaina | PSB3 | |
| 103 | ITV 1 HD | Blaina | PSB3 | |
| 104 | Channel 4 HD | Blaina | PSB3 | |
| 105 | Channel 5 HD | Blaina | PSB3 | |
| 106 | BBC Four HD | Blaina | PSB3 | |
| 107 | BBC Three HD | Blaina | PSB3 | |
| 108 | BBC Scotland HD | Blaina | PSB3 | |
| 110 | Channel 4 HD (Wales) | Blaina | PSB3 | |
| 201 | CBBC | Blaina Wales | PSB1 | |
| 202 | CBeebies | Blaina Wales | PSB1 | |
| 204 | CBBC HD | Blaina | PSB3 | |
| 205 | CBeebies HD | Blaina | PSB3 | |
| 231 | BBC News | Blaina Wales | PSB1 | |
| 232 | BBC Parliament | Blaina Wales | PSB1 |
Advanced options
Show good and blocked paths from NP13 3BD for aerial height of ...10m20m (Angel of the North)25m30m40m56m (Hyde Park Flats, Sheffield)62m (Monument)90m (Royal Liver Building, Liverpool)107m (Meridian Quay Tower, Swansea)115m (Bridgewater Place, Leeds)127m (Glasgow Tower)143m (Guy's Hospital)158m (Blackpool Tower)170m (Spinnaker Tower, Portsmouth)180m (The Gherkin/BT Tower) 193m (Tower 42)235m (Canary Wharf)310m (The Shard)(default view)
Sunday, 24 May 2015
S
Sharon collins12:36 PM
TV no sound on terrestrial aerial. Just stopped working. Works when plugged into cable in another room.
Picture & channels are find. Just no sound.
| link to this comment |
M
MikeB5:53 PM
Sharon collins: Is your TV plugged into a freeview box, or is there one built in?
If its plugged into a freeview box in one room, and the same in another, then the scart connection/cable might be playing up - all the pins have to connect properly, and if they dont, you can then get everyone being green on the screen or loss of sound.
If its not, then thats weird! If the TV works fine plugged into a normal TV aerial in one room, but not another, it doesn't make sense. If the signal was bad in one room, then it would be just the sound, it would be whole channels being a bit dodgy.
| link to this comment |
S
Sharon collins8:45 PM
MikeB: hi there
The freeview is built in. No scart. Plugged into a terrestrial aearial. No sound
It works in room with cable plugged in
So not the TV set
| link to this comment |
J
jb389:34 PM
Sharon collins: You should try carrying out a "manufacturers reset" on the TV, as what you have reported could possibly be due to a glitch having occurred in the TV's processing circuitry.
By the way, "manufacturers reset" is also known as "default setting" / "first time installation" etc.
| link to this comment |
Monday, 25 May 2015
G
GeordieLad3:52 PM
Towcester
Despite several complete retunes on all TVs and Set Top Boxes in my house I cannot see Ch45 (Film4 + 1). I also understood that there was a MoviesForMen +1 chnnel but similarly can't see it. Can someone give a reason for this? My Post Code is NN12 7TN and I have no other problems with the Sandy Heath transmitter.
| link to this comment |
GeordieLad's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
Dave Lindsay
5:04 PM
5:04 PM
GeordieLad: Film4+1 is now carried on PSB3 multiplex, which requires a Freeview HD receiver, as it uses a DVB-T2 signal.
A full list of Freeview services is available here:
Digital UK Industry - Channel listings
Movies4Men+1 is available only in the Manchester and some surrounding areas, via the G_MAN multiplex which broadcasts only from Winter Hill in the direction of Manchester.
| link to this comment |
Friday, 29 May 2015
N
Neil12:34 PM
Wimborne
BH21 3SF
| link to this comment |
Neil's: mapN's Freeview map terrainN's terrain plot wavesN's frequency data N's Freeview Detailed Coverage
J
John S6:02 PM
I had everything set up and working but now the DVD/VCR Combi refuses to Play.
When I record something on AV2 or try and play a DVD or Video Cassette it plays but no signal passes through to the telly.
The telly has three sources: TV, HDMI and Ext.
I am assuming the DVD/VCR Combi is supposed to pass the signal to Ext but nothing displays.
Help Please! I have this configuration:
VCR Freeview Philips HDTP 8530 with:
One HDMI
One SCART
LED TV Samsung UE48H5510 with:
SCART EXT1
3 HDMI Ports
Optical Cable to Sound Bar
DVD/Video Recorder Panasonic DMR-EZ47VEB:
HDMI AV OUT
Optical OUT
Audi Out
Video Out
S-VIDEO OUT
AV1 SCART (TV)
AV2 SCART (Ext)
Soundbar including separate subwoofer with:
Optical Cable to TV
Currently Connected Up as:
HDMI from TV to Freeview Box
SCART from TV (EXT RGB) to DVD Recorder Combi AV1 IN.
SCART from DVD Recorder Combi AV2 EXT Out to Freeview SCART
Aerial goes into Freeview box. Fly lead to DVD Recorder Combi and another from there to TV.
| link to this comment |
M
MikeB9:17 PM
John S: First question to ask is WHY ARE YOU STILL USING SCARTS!
Sorry, but I'm shouting for effect. Last November, I said the same thing, and I suspect your problem is because you are using scarts, with odd settings. I think that you've set up the scarts so the scarts on both TV and VCR are inputs, hence nowt coming out!
OK - aerial lead is kind of fine. Its a bit of a long chain, but it seems to work. Please call your PVR a PVR, a Philips, etc - calling it a Freeview box confuses the life out of everyone, including me!
HDMI from Philips to TV, using whatever HDMI's work, but HDMI is best. With the two HDMI ports that are left, connect one to the Panasonic. You should automatically get the Samsung's internal tuner when the TV is switched on, unless the PVR or Panasonic is switched on. You should then be able to switch between HDMI's via the source button.
Thats it. Remove the scart leads, put them in a box, seal it, and leave them alone. Do not touch them again. You dont need them. As Edna 'E' Mode almost said in 'The Incrediables', 'No Scarts!'
| link to this comment |
Sunday, 31 May 2015
N
Nigel11:07 AM
Hello
My hd freeview started messing up blocky picture etc it as a signal strength of 100 per cent and a signal quality of only 1 per cent.
I've changed the co axial connection (same result) ive tried a 20bb varialble attenuator (got the strength lower but no change on signal quality and also tried a 6db and 12db supressor.
I've done a reset on the tv (lg32ld490) no change.
Any advice would be apprectiated.
The transmitter mast is Emley Moor
| link to this comment |
Select more comments
Your comment please