Full Freeview on the Belmont (Lincolnshire, England) transmitter
|Google Streetview||Google map||Bing map||Google Earth||53.335,-0.172 or 53°20'7"N 0°10'20"W||LN8 6JT|
The symbol shows the location of the Belmont (Lincolnshire, England) transmitter which serves 710,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
Which Freeview channels does the Belmont transmitter broadcast?If you have any kind of Freeview fault, follow this Freeview reset procedure first.
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
1 BBC One (SD) East Yorkshire and Lincolnshire, 2 BBC Two England, 9 BBC Four, 23 BBC Three, 201 CBBC, 202 CBeebies, 231 BBC News, 232 BBC Parliament, 250 BBC Red Button, plus 16 others 700 BBC Radio 1, 701 BBC Radio 1Xtra, 702 BBC Radio 2, 703 BBC Radio 3, 704 BBC Radio 4 (FM), 705 BBC Radio 5 Live, 706 BBC Radio 5 Live Sports Extra, 707 BBC Radio 6 Music, 708 BBC Radio 4 Extra, 709 BBC Asian Network, 710 BBC World Service, 719 BBC Norfolk (BBC local radio), 720 BBC Nottingham (BBC local radio), 721 BBC Humberside (BBC local radio), 722 BBC Lincolnshire (BBC local radio), 734 BBC Sheffield (BBC local radio),
3 ITV 1 (SD) (Yorkshire (Belmont micro region)), 4 Channel 4 (SD) North ads, 5 Channel 5, 6 ITV 2, 10 ITV3, 13 E4, 14 Film4, 15 Channel 4 +1 North ads, 18 More4, 26 ITV4, 28 ITVBe, 30 E4 +1, 35 ITV1 +1 (Yorkshire Emley Moor),
46 5SELECT, 101 BBC One HD East Yorkshire and Lincolnshire, 102 BBC Two HD England, 103 ITV 1 HD (ITV Granada), 104 Channel 4 HD North ads, 105 Channel 5 HD, 106 BBC Four HD, 109 BBC Three HD, 204 CBBC HD, 205 CBeebies HD, plus 1 others 66 TBN UK,
20 Drama, 21 5USA, 29 ITV2 +1, 32 5STAR, 33 5Action, 38 Channel 5 +1, 41 Legend, 42 Great! Movies Action, 57 Dave ja vu, 58 ITVBe +1, 59 ITV3 +1, 64 Blaze, 67 CBS Reality, 69 HorrorXtra, 78 TCC, 81 Blaze +1, 89 ITV4 +1, 91 WildEarth, 203 CITV, 208 Pop Player, 209 Ketchup TV, 210 Ketchup Too, 211 YAAAS!, plus 16 others Racing TV, Kiss Chat & Date, Proud Dating, ADULT Xpanded2, 16 QVC, 22 TJC, 37 QVC2, 237 TalkTV, 263 SonLife, 264 VisionTV, 265 On Demand 365, 269 Arise News, 670 ADULT Section (start), 724 Capital, 727 Absolute Radio, 728 Heart,
Smithsonian Channel, 11 Sky Arts, 17 Really, 19 Dave, 31 E4 Extra, 36 pick, 40 Quest Red, 43 Food Network, 47 Film4 +1, 48 Challenge, 49 4seven, 60 Drama +1, 70 Quest +1, 71 That's 60s, 74 Yesterday +1, 75 That's 70s, 233 Sky News, plus 9 others CRAFT EXTRA , 45 Gems TV, 85 Create and Craft, 673 ADULT smileTV3, 723 talkSPORT, 730 RNIB Connect, 731 Classic FM, 732 LBC, 733 Trans World Radio,
Quest Red +1, Classic Hits, 12 Quest, 25 W, 27 Yesterday, 34 GREAT! movies, 39 DMAX, 44 HGTV, 52 GREAT! romance, 73 HobbyMaker, 76 That's 80s, 82 Talking Pictures TV, 83 Together TV, 84 PBS America, 90 Together TV +1, 235 Al Jazeera Eng, plus 19 others ADULT smileTV2, ADULT Studio 66, QVC Style, 50 GREAT! tv, 51 Ideal World, 72 Jewellery Maker, 206 Pop, 674 ADULT Babestn, 678 Xpanded TV, 699 ADULT Section, 711 Hits Radio, 712 KISS FRESH, 713 KISS, 714 KISSTORY, 715 Magic, 716 Greatest Hits Radio, 717 Kerrang!, 718 Smooth Radio, 725 Premier Radio,
7 Estuary TV Doncaster,
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Belmont transmitter?
BBC Look North (Hull) 0.7m homes 2.7%
from Hull HU1 3RH, 47km north-northwest (346°)
to BBC East Yorkshire and Lincolnshire region - 4 masts.
How will the Belmont (Lincolnshire, England) transmission frequencies change over time?
|1965-80s||1984-97||1997-98||1998-2011||2011-13||4 Mar 2020|
|VHF||A K T||W T||W T||W T||W T|
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 3 Aug 11 and 17 Aug 11.
How do the old analogue and currrent digital signal levels compare?
|BBCA, D3+4, BBCB||(-5.2dB) 150kW|
|ARQA, ARQB||(-7dB) 100kW|
|Analogue 5, SDN||(-10dB) 50kW|
|Mux 2*||(-14dB) 20kW|
|Mux 1*, Mux A*, Mux B*||(-17dB) 10kW|
|Mux C*, Mux D*||(-21dB) 4kW|
Which companies have run the Channel 3 services in the Belmont transmitter area
Chris.SE: Thanks for your prompt reply. I can receive COM7 (C55) signals. I am not sure when the aerial was installed but it was installed not long after digital broadcasting became available in Sheffield because the existing one would not pick up digital signals. The aerial appears in good condition (from the ground) & is pointing east in a similar direction to my neighbours aerials. I am not sure of the make and model of the aerial.
The booster is a splitter as well it is a Wolsey 4 way IR Pass LTE Distribution AMP 334022.
I am not sure how to take the booster out of circuit.
|link to this comment|
John Simon Knight:
Just for reference, all UHF aerials will pick up TV signals whether they were analogue or digital, it's all RF (Radio Frequency). It's more likely that your old aerial and/or connections or cable had deteriorated and weren't good enough.
That particular model of booster/splitter unfortunately doesn't appear to have a gain control, if it did it would be near the UHF input connector marked 0-10dB. To take it out of circuit, you'd need an F-Connector female to female (back to back) connector, so you would unplug the aerial from the input and unplug the main tv output and connect them using the coupler. More on that in a moment as there are some other things you could do first.
With this particular booster/splitter and it's IR facilities, each output has short circuit power supply protection. May or may not be relevant have you changed any equipment when you started to get the problems?
So what you need to do is try and check that there aren't any faults on any of your cables, connectors or equipment. Flyleads connecting aerial output sockets to sets and between items such as PVRs/Video recorders/TV sets etc can be a problem. Also check you don't have any HDMI leads close to aerial or flyleads. Aerial leads and flyleads if not double screened can in some cases get interference from HDMI leads.
One of the best ways to do fault checking would be to start by checking the signals and quality on any second room & set and noting them down. Then by unplugging all the outputs from the booster and plug the one from your main TV into a different socket from the one it (or another set) was in. Check that the cable into the connector looks secure and that no fine wires from the braid appear to be shorting the centre conductor.
At the TV end connect the aerial (socket) direct to the TV not going via any other equipment (turn that off at the mains). If you use a flylead, try and use a different one, or if you normally have a couple connecting say a PVR the swap them during the testing.
Check your signal levels and quality and see if they are any different from what you had before, then try the original and another output on the booster to see if they are different. If any/all are improved, it suggests that there could be a fault on one of the outputs or other cables currently unplugged. So try plugging one at a time back in and see if one reduces the signal and quality. That's both any interconnecting cables if you have say a PVR (and power it up again), or the cable(s) to other rooms/sets.
If with just the main TV, all those are the same as before, then you need to see what you are getting on a second set on its own cable, it could be the main room/set's cable faulty.
So unplug the main TV cable at the booster and plug in a second room/set cable (preferably a different output from before). If these readings are now better, then plugging the main TV one back in may reduce the signal showing a fault on the main TV cable.
As I'm sure you've worked out by now, it's a process of elimination. If with all those checks nothing changes and all readings remain the same, then we need to first by-pass the amp to see what difference that makes, this is where you need this coupler and as you live in Sheffield https://www.aerialsandtv.….jpg I'd recommend you go to ATV in Langsett Rd where you can get one for 75p. Most other sellers do them in packs of 2 or more and you'll pay a lot more which is silly as you only need the one for testing!
What you need to check ideally is the signals and quality on the stronger/strongest multiplexes with and without the booster. This will give you a good idea if the booster is still doing it's job. If it seems to be working ok then you'll need to consider a fault at the aerial or it's downlead !!
|link to this comment|
Notts TV is broadcast from the Local Multiplex on the Waltham transmitter which will be roughly SSW of you whereas Belmont roughly NE of you broadcasts That's Humber on the Local Multiplex.
If you are receiving your main signals from Belmont then you'd have been picking up the Waltham signal off a rear sidelobe on your aerial which is probably more of a fluke than anything reliable.
As reception across the LN5 postcode district will be very variable, it's not possible to say which transmitter(s) will serve you best without a full postcode.
In any event you MIGHT have a choice of reliable signals, if you want the Yorkshire region then you'd aim for Belmont, or Central East then it'd be Waltham. You may not be predicted to get (never mind reliably) the Local Multiplex from either transmitter.
|link to this comment|
Updated information - The Waltham transmitter has been on Planned Engineering with "Possible weak signal" which would likely affect your reception of the Local multiplex if your aerial is pointing at Waltham (roughly SSW of you).
|link to this comment|
If you are receiving signals from the Belmont transmitter (I can't be certain as you haven't provided as full postcode), the transmitter is currently listed for Planned Engineering with "Possible weak signal".
If the signal you get isn't that strong, that can appear like No signal. When you retune in such circumstances, generally it just clears all correct tuning. The general advice is NOT to retune when you have no or pixellated signals, you should only do so when prompted by on-screen pop-ups (turn off any automatic retune/updates in your tuning settings - it's usually more trouble than it's worth.)
You will have to repeat retune when the signals are back to normal, you may have to try several times.
|link to this comment|