Full Freeview on the Hannington (Hampshire, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 51.308,-1.245 or 51°18'28"N 1°14'43"W |  | RG26 5UD |
The symbol shows the location of the Hannington (Hampshire, England) transmitter which serves 470,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Hannington (Hampshire, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Hannington transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Hannington transmitter?
BBC South Today 1.3m homes 4.9%
from Southampton SO14 7PU, 46km south-southwest (194°)
to BBC South region - 39 masts.
ITV Meridian News 0.9m homes 3.4%
from Whiteley PO15 7AD, 48km south (179°)
to ITV Meridian/Central (Thames Valley) region - 15 masts.
Thames Valley opt-out from Meridian (South). All of lunch, weekend and 50% evening news is shared with all of Meridian+Oxford
How will the Hannington (Hampshire, England) transmission frequencies change over time?
| 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 18 Apr 2018 | |||||
| E | E | E | B E T | W T | |||||
| C32 | com7 | ||||||||
| C34 | com8 | ||||||||
| C35 | C5waves | C5waves | |||||||
| C39 | BBC1waves | BBC1waves | BBC1waves | +BBCB | BBCB | ||||
| C40 | SDN | ||||||||
| C41 | SDN | ||||||||
| C42 | ITVwaves | ITVwaves | ITVwaves | D3+4 | D3+4 | ||||
| C43 | ArqA | ||||||||
| C44 | ArqA | ||||||||
| C45 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
| C46 | ArqB | ||||||||
| C47 | ArqB | ||||||||
| C51tv_off | _local | ||||||||
| C55tv_off | com7tv_off | ||||||||
| C56tv_off | COM8tv_off | ||||||||
| C66 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 8 Feb 12 and 22 Feb 12.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 250kW | |
| Analogue 5 | (-6.2dB) 60kW | |
| BBCA, D3+4, BBCB | (-7dB) 50kW | |
| com7 | (-8.3dB) 36.7kW | |
| com8 | (-9.8dB) 26.2kW | |
| SDN, ARQA, ARQB | (-10dB) 25kW | |
| Mux 1*, Mux 2*, Mux A*, Mux B* | (-11dB) 20kW | |
| Mux C*, Mux D* | (-14dB) 10kW |
Which companies have run the Channel 3 services in the Hannington transmitter area
|
|
Tuesday, 30 January 2018
C
Chris.SE2:52 PM
Roger Scott: Forgot to add, that if you are getting a significant signal on Ch.29 from your Hannington aerial (the mux aimed at Reading) then this will be a much more difficult issue to resolve at this time, also after March 21st this year COM7&8 at Crystal Palace move to Ch.55&56. These muxes at Hannington move to Ch.55&56 on April 18th. So it's possible that your current diplexer will give you a working solution after that date.
| link to this comment |
C
Chris.SE3:24 PM
Roger Scott: OOOps, sorry, my last statement is incorrect as the Local Muxes are also moving channel.
Crystal Palace is moving from Ch.29 to Ch.35 on March 21st (with apparently some increase in power - not sure of detail), and Hannington is moving from Ch.51 to Ch.32 on April 18th and the other local Mux on Ch.29 is moving to Ch.34 on that date.
So a standard diplexer is not going to provide a solution, whereas a low loss splitter might.
Also with COMs 7&8 on Ch.55&56 from both transmitters after that date, though they are SFNs you hopefully won't have a problem, but you definitely shouldn't if your Crystal Palace aerial is a Group A aerial and so won't get Chs.55&56 with any decent strength.
| link to this comment |
R
Roger Scott11:09 PM
Chris. Thank you very much for this information. It seems that I won't really know the outcome until these other frequency changes are done in the spring. For the moment I have refitted the diplexer so am back with the BBC4HD signal problem but I can use my Sky box to watch this channel. My Crystal Palace aerial is definitely an A group and the Hannington aerial is possibly a B group as in the anologue days Channel 5 on channel 66 always had a snowy picture. It would seem with the frequency changes ideally the aerials should be wide band. I image that there are similar frequency changes in other regions as well in preparation of loosing the 700 MHz band
| link to this comment |
Wednesday, 31 January 2018
MikeP
11:48 PM
11:48 PM
Roger Scott:
Instead of using a diplexer feeding two aerials into one TV, you may well do better to have a coaxial switch that is fed by both aerials. You can then switch between Hannington and Crystal Palace without getting any problems of interference between the signals. Plus there would be less signal loss.
When I live in Swindon, I used one so I could get both Mendip and Oxford signals and watch Central South as well as BBC West. It worked very well for me so it should be ideal for you, certainly better than using a diplexer with its losses and risk of serious interference on some multiplexes that share the same channel.
.
| link to this comment |
Thursday, 1 February 2018
R
Roger Scott10:22 PM
MikeP. Thanks for that suggestion which does make sense. The only problem I have is that the aerial feeds go into the loft where the diplexer is and from there I have one coax feeding down to the TV. Obviously it's not practical to go into the loft every time I want to change regions so I will need to fit an additional coax from the loft to the TV so that I can fit the change over switch by the TV
| link to this comment |
R
Roger Scott10:29 PM
MikeP. Thank you for your suggestion which does make sense. The problem I have though is that both aerial feeds go into the loft where the diplexer is and from there I have one coax going down to the TV. Obviously it's not practical to go into the loft every time I want to change regions so I would need to run another coax from the loft to the TV so that the change over switch is near the tv
| link to this comment |
Tuesday, 13 February 2018
K
Keith Farrington5:27 PM
Help! I am in the RG31 post code area and receive signal from Hannington transmitter. Since the beginning of February I have been having problems with low signal quality. I have been monitoring this on my TV diagnostics facility now for 10 days. I noticed that the problem started at around 16:30 each day, including Saturday and Sunday. Before 16:30 signal quality is reliably at 100%. After 16:30, signal quality plummets to below 10% and regularly below 7%. This situation lasts for 70-75 minutes, when the signal quality becomes 100% again. Note that the signal strength does not drop, at least until the low signal quality causes 'no signal'
It appears that something is switched on at 16:30 and interferes with the Hannington signal. 75 minutes later it is switched off and the interference disappears.
What can I do to identify exactly what is going? I do not believe it is 'induction' interference from other appliances, as I am quite familiar with that.
| link to this comment |
M
MikeB10:21 PM
Keith Farrington: Since it sounds exactly like single source interference, why would you reject that possibility?
In the meantime, at least check all your cables - if they are poorly shielded, etc, then that will make the problem much worse.
| link to this comment |
Wednesday, 14 February 2018
MikeP
10:30 AM
10:30 AM
Keith Farrington:
As a matter of interest, do you havce a 'smart meter' fitted? Some have been saying they are getting interference from the meter's WiFi system.
| link to this comment |
Thursday, 15 February 2018
K
Keith Farrington3:50 PM
MikeP:
Thanks for that idea. I don't have a 'Smart Meter' fitted yet.
| link to this comment |
Select more comments
Your comment please