Full Freeview on the Pontop Pike (County Durham, England) transmitter
Google Streetview | Google map | Bing map | Google Earth | 54.868,-1.771 or 54°52'5"N 1°46'15"W | DH9 9AT |
The symbol shows the location of the Pontop Pike (County Durham, England) transmitter which serves 700,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Pontop Pike transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Pontop Pike transmitter?

BBC Look North (Newcastle) 1.6m homes 6.0%
from Newcastle NE99 2NE, 15km northeast (42°)
to BBC North East and Cumbria region - 70 masts.

ITV Tyne Tees News 1.4m homes 5.4%
from Gateshead NE11 9SZ, 12km north-northeast (29°)
to ITV Tyne Tees region - 47 masts.
All of lunch, weekend and 50% evening news is shared with Border
Are there any self-help relays?
Kieldor Dam | Active deflector | 6 homes Holiday complex | |
Low Haber | Active deflector | West Allen Dale, 18 kn SW Hexham | caravan site |
North Hartlepool | Transposer | 84 homes |
How will the Pontop Pike (County Durham, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 13 Nov 2019 | ||||
VHF | C/D E | C/D E | C/D E | C/D E T | W T | ||||
C5 | BBCtvwaves | ||||||||
C32 | SDN | ||||||||
C33 | com7 | ||||||||
C34 | com8 | ||||||||
C35 | ArqB | ||||||||
C39 | BBCA | ||||||||
C42 | D3+4 | ||||||||
C45 | BBCB | ||||||||
C49tv_off | BBCB | ||||||||
C50tv_off | SDN | ||||||||
C54tv_off | C4waves | C4waves | C4waves | D3+4 | |||||
C55tv_off | ArqB | com7tv_off | |||||||
C56tv_off | LNE | ||||||||
C58tv_off | BBC1waves | BBC1waves | BBC1waves | BBCA | |||||
C59tv_off | ArqA | ||||||||
C61 | ITVwaves | ITVwaves | ITVwaves | ||||||
C64 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 12 Sep 12 and 26 Sep 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
BBCA, D3+4, BBCB | (-7dB) 100kW | |
SDN, ARQA, ARQB | (-10dB) 50kW | |
com8 | (-11.6dB) 34.6kW | |
com7 | (-11.7dB) 33.8kW | |
Mux 1*, Mux 2*, Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 10kW | |
LNE | (-20dB) 5kW |
Local transmitter maps
Pontop Pike Freeview Pontop Pike TV region BBC North East and Cumbria Tyne TeesWhich companies have run the Channel 3 services in the Pontop Pike transmitter area
|
|
Monday, 7 January 2013
David Cook: Have you confirmed that you are indeed receiving the signals from Pontop Pike and not Bilsdale?
Bilsdale is a possibility, particularly if your receiver goes with the first signals it finds; Pontop Pike uses higher channels and are thus found later on in the scan.
Receivers usually give the tuned UHF channel on signal strength screens. Check the following:
PSB1 | BBC One | P=C58 | B=C26 | F=C27
PSB2 | ITV1 | P=C54 | B=C29 | F=C24
PSB3 | BBC One HD | P=C49 | B=C23 | F=C21
COM4 | ITV3 | P=C50 | B=C43 | F=C25
COM5 | Pick TV | P=C59 | B=C46 | F=C22
COM6 | Film4 | P=C55 | B=C40 | F=C28
P=Pontop Pike, B=Bilsdale and F=Fenham
For example, bring up the signal strength screen and it should be tuned to 58 for Pontop Pike, or could be 26 if it's Bilsdale or 27 for Fenham.
If you have either Fenham or Bilsdale tuned in, run the automatic tuning scan with the aerial unplugged until 53% to miss out scanning of their channels.
link to this comment |
David Cook: The example is to bring up the signal strength screen on BBC One.
link to this comment |
Wednesday, 9 January 2013
G
Graham Francis11:40 AM
Newcastle Upon Tyne
NE16 6BS
My Panasonic TV has suddenly lost Channel 50 (ITV3 etc).
Other TVs using the same aerial are OK.
link to this comment |
Graham's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
R
Robert3:52 PM
yep channel 50 gone in Hebburn too - this morning CITV nd ITV3 were gone on the SONY box (2x TV worked OK)....
link to this comment |
There is another report of the same issue, also with a Panasonic being affected, but not a Humax:
Single frequency interference | Freeview Interference | ukfree.tv - 10 years of independent, free digital TV advice
Dave says that he has spoken to John Lewis about it and they've had other reports.
link to this comment |
Correction: It's Panasonic that has had other reports, not John Lewis.
link to this comment |
And another report stating issues at two addresses:
ITV 3 | ukfree.tv - 10 years of independent, free digital TV advice
link to this comment |
D
Debbie8:03 PM
Cramlington
Having trouble with lost channels here too on 2 Panasonic tv's and a blu ray recorder.
So far lost ITV3, 5*, 5 USA, 5+1 and QVC.
link to this comment |
Debbie's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
J
jb389:37 PM
Debbie: There are various reports regarding a reception problems with the SDN transmitter, and "if" you haven't carried out a rescan (which should never be done anyway if a channel appears lost) carry out a signal test on ITV3 (mux Ch50) and check what the level is indicated as being, because even if there is no picture the signal will most likely still be there but at a low level.
Once this is done try the same test on Film 4 (mux Ch55) and compare the two levels, giving an up date on the result.
Note though! if you have carried out a rescan then please ignore this request as you will have lost the channel from the tuners memory.
link to this comment |
Select more comments
Your comment please