Freeview Light on the Stanton Moor (Derbyshire, England) transmitter
|Google map||Bing map||Google Earth||53.170,-1.633 or 53°10'12"N 1°38'0"W||DE4 2LS|
The symbol shows the location of the Stanton Moor (Derbyshire, England) transmitter which serves 3,900 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problemsThe BBC and Digital UK report there are no faults or engineering work on the Stanton Moor (Derbyshire, England) transmitter.
Which Freeview channels does the Stanton Moor transmitter broadcast?If you have any kind of Freeview fault, follow this Freeview reset procedure first.
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
Are you trying to watch these 44 Freeview channels?
The Stanton Moor (Derbyshire, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: 4seven, 5Action, 5STAR, 5USA, Al Jazeera Eng, Al Jazeera English, Blaze, Blaze +1, Challenge, Channel 5 +1, Dave, Dave ja vu, DMAX, Drama +1, E4 Extra, YAAAS!, Film4 +1, Food Network, GREAT! action, GREAT! christmas, GREAT! movies extra, GREAT! movies, HGTV, HobbyMaker, ITV2 +1, ITV3 +1, ITV4 +1, ITVBe +1, Legend, PBS America, Quest +1, Quest Red, Really, Sky Mix, Sky News, Talking Pictures TV, TCC, That's 90s, That's Christmas, Together TV, TRUE CRIME, TRUE CRIME XTRA, W, Yesterday +1.
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Stanton Moor transmitter?
BBC East Midlands Today 0.9m homes 3.4%
from Nottingham NG2 4UU, 41km southeast (126°)
to BBC East Midlands region - 17 masts.
How will the Stanton Moor (Derbyshire, England) transmission frequencies change over time?
|1984-97||1997-98||1998-2011||2011-13||2013-18||2013-17||4 Mar 2020|
|C/D E||C/D E||C/D E||C/D E||C/D E T||C/D E T||A K T|
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 17 Aug 11 and 31 Aug 11.
How do the old analogue and currrent digital signal levels compare?
|BBCA, D3+4, BBCB||(-7dB) 400W|
Which companies have run the Channel 3 services in the Waltham transmitter area
RE: Stanton Moor Transmitter
I've just noticed earlier this morning that C26 has stopped working. The TV says weak or no signal but I have all the C23 and C30 channels. HD channels all working good (which usually go first when the signal gets a bit dodgy). It's the same on two separate TVs. I've tried re-tuning a couple of times but it's not found any C26 channels. Please can you advise if you have any faults reported.
I live at the top of Bakewell.
|link to this comment|
Hi, I can't find any faults listed at present and the transmitter isn't currently listed for Planned Engineering. Having said that we know lists aren't always 100% accurate, and with the severe weather conditions we've just had, there could be a delay in reporting all incidents.
Unfortunately you've done the wrong thing. It's never recommended that you retune, if you were correctly tuned previously, when you have no signal or badly pixellated pictures. It will usually clear your correct tuning. You cannot tune to a signal that's not there or can't be decoded.
Your best bet is to try manually retuning C26 until you get them back. You may have to try several times depending on the cause and when signals return. Once you have them back, leave it alone.
If your set shows No signal or the pictures are badly pixellated whatever the cause, transmitter faults or engineering, weather conditions, a fault on your aerial system, then retuning will not help.
Do check that your aerial looks intact and is still pointing correctly and that the downlead isn't flapping in the wind. Check all accessible coax connections and plugs and ensure there is no corrosion or water ingress. Faults like that can have an adverse effect on just one multiplex without immediately obvious effects on others.
|link to this comment|