menuMENU    UK Free TV logo Archive (2002-)



Click to see updates

Craigkelly, Scotland switchover process starts today

The switchover in Scotland continues with the first stage of the changes at the Craigkelly transmitter.

The switchover in Scotland continues with the first stage of th
published on UK Free TV

This week sees the first stage of switchover for 451,600 homes in Edinburgh and East Central Scotland.

From 6am Wednesday 1st June 2011, you will need to retune your Freeview box or television set if you use the Craigkelly full service Freeview transmitter.

If you use the Aberfoyle, Cannongate HP, Grangemouth, Kinross, Newbattle, Penicuik and West Linton relay transmitters, from this date you will also be able to receive all the BBC Freeview services (except HD), and you will no longer be able to view BBC TWO on analogue.

You MAY find that old equipment will no longer work - see TVs and boxes that do not support the 8k-mode

On Wednesday 15th June 2011 will see the second stage of switchover, which provides the final Freeview configuration, including Freeview HD for all transmitters in this region.

Help with Freeview, aerials?
How do I get a test card with Freeview1
I would like to know if it is possible to receive UK terrestrial Freeview servic2
I have been told I would receive too much singal from my Freeview tansmitter as 3
Can my Freeview box receive more than one BBC and ITV region?4
Is it true that my 87 year old mother is entitled to a FREE upgrade when the ana5
In this section
Should the UK close down the TV networks to allow for more mobile broadband? 1
UK Digital switchover ends - Northern Ireland completes on 24th October 20122
The last day of analogue television in the UK - goodbye PAL3
2 days left of analogue television - goodbye teletext4
3 days of analogue to go - goodbye to NICAM 7285
Changes to Saorview frequencies and power levels, 24th October 20126

Wednesday, 1 June 2011
Neville Wake
11:38 AM

I have retuned my Top Up TV box and BBC One is now number 846 on the Guide. Will it remain so or will the second retune give me the old order back again with BBC One as number 1?

link to this comment
Neville Wake's 2 posts GB flag

12:36 PM

Neville Wake: You will need to do a factory reset to clear the channel list of any memory of BBC1 on the old Mux1 frequency if that still remains in position 1. If you continue to get BBC1 stored in the 800s with a non working version in position 1 it will be because a weak signal from a distant transmitter is being found and stored during the scan in addition to the required signal. Doing a manual tune for the correct frequencies, after first clearing the channel list, restores channel storage in the correct LCN slots.

link to this comment
KMJ,Derby's 1,811 posts GB flag
Stuart Brown
3:42 PM

I have re-tuned TV and all channels are there apart from BBC - BBC1 and 2 and the other related BBC TV channels come up with message - "No Signal". Is this temporary - I live in Edinburgh ?

link to this comment
Stuart Brown's 1 post GB flag
6:23 PM
North Berwick

stuart, I live near haddington and have the same problem. Not had time to do more checks but bbc 1 and 2 were had no signal before I headed off to work. Hopefull someone will be able to help :)

link to this comment
milly's 1 post GB flag
milly's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
8:00 PM

how do we retune our tv? getting no reception on any digital channels - Edinburgh

link to this comment
Cutting's 1 post GB flag
Cutting's: mapC's Freeview map terrainC's terrain plot wavesC's frequency data C's Freeview Detailed Coverage
John Robinson

8:14 PM

Retuned my el cheapo Sagem Freeview box and find I no longer receive BBC Three or BBC News properly on channels 7 and 80 respectively, though both are very vaguely there but badly broken up. I do get them fine on channels 800 and 801. I have done a factory reset as KMJ,Derby recommended to Neville Wake with exactly the same result.

I suspect I'm seeing a lot of transmitters. I have noted down the progress my box stops on while tuning, with the channel (it's too fast for me to get the MHz), the number of TV stations I have so far, and the 2K/8K mode as follows:

23 28 2
26 46 2
27 70 8
28 70 8
29 80 2
39 106 2
41 116 2
42 132 2
44 132 2
47 132 2
51 132 2
53 142 8
54 170 8
55 170 2
58 187 8
60 211 8
61 238 8
65 238 2

That's a heck of a lot more stops during tuning than it used to do, and some of them very close together. Is my aerial too sensitive for high power Freeview?

link to this comment
John Robinson's 43 posts GB flag
Thursday, 2 June 2011
8:16 AM

Port Seton - I've lost all my BBC digital channels over the last few days. All my freeview can tune into is BBC Parliament. I thought this change over was to just get rid of analogue and not affect digital?

link to this comment
glb37's 10 posts GB flag

8:47 AM

glb37: No, as per the article, this was the first stage of switchover, the second stage is on Wednesday 15th June 2011.

At switchover the frequencies used change, so you have to do a "first time installation" on each date.

link to this comment
Briantist's 38,899 posts GB flag

8:50 AM

milly: You will need to do a "first time installation" and do it again on Wednesday 15th June 2011.

link to this comment
Briantist's 38,899 posts GB flag
Select more comments
Page 1

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.

Privacy policy: UK Free Privacy policy.