All posts by jas
Below are all of jas's postings, with the most recent are at the bottom of the page.
PROBLEMS CONTROLING SKY USING MAGIC EYE
i can still see the picture on the other tvs but cant control the channel?
checked the magic eye which has it red led and the fact the picture is there doesnt quite make sense why it cant be controlled?
any ideas?
thanks
| link to this comment |
Hi Briantist
the rf out 2 goes to a multi connection box, with aerials going into tvs in the bedroom and kitchen.
so the inlet to the tv has an aerial which is then connected to the magic eye. when the signal is present the red led on the magic eye lights up.
currently i have a pciture on the tv but cant change the channel? could be linked to digital switchover?
| link to this comment |
Brian
Was thinking it might be something simple like a setting might be off?
not familiar with the menu set-up, i can get to the main part services 001 select
is there anything in particular i may be missing?
| link to this comment |
brain yes followed those instructions that was the first protocol
i have checked the magic eye on all of them they all have the red led to indicate the signal is presen. i have then plugged them into the secondary tvs and get the image but again no control
pretty fuming as rang sky twice and both advisors had no answer. 1 said to get a replacement remote which they will charge 25.99 for. even though we are paying £70 a month
| link to this comment |
yes it works directly with the sky box
intresting enough we have 2 brands of magic eye, the 2 tvlink ones didnt work but the other magic eye does. the picture however is very poor when plugged through the magic eye, when connected without it its somewhat better
so the problem has been the magic eye itself.
next step, any idea on the best one to get?
| link to this comment |
Tuesday 18 October 2011 12:56PM
ive had sky hd for a year and have the magic eye around the house.
i can still see the picture on the other tvs but cant control the channel?
checked the magic eye which has it red led and the fact the picture is there doesnt quite make sense why it cant be controlled?
any ideas?
thanks