News
TV
Freeview
Freesat
Maps
Radio
Help!
Archive (2002-)
All posts by deb
Below are all of deb's postings, with the most recent are at the bottom of the page.thanks Mark, if only it were just that. The digi aerial cable is securely in place, plugged in and switched on, with power (green light)It's located directly above externally pretty much and the new sat dish is at the back of the house so no possibility of dislodging in the changeover either...help
link to this comment |
Hi Mark, it's a box. The aerial cable comes through the outside wall into it (tansformer?Vision V23-560)there's another cable coming out of the same end which goes into the tv, and a power cable the opposite end plugs into the mains. It was fitted about 2 years ago when we upgraded the roof aerial to improve the Freeview pics on tv and it did the trick until we changed to Sky+HD
link to this comment |
Friday 18 February 2011 3:12PM
sorry I need an answer in laymans terms I'm no tekki...since having sky+hd fitted (from basic sky)we seem to have lost the reception to our freeview digi channels on our Sony tv. I've retuned a number of times but same thing. the channels are found so it isn't a tuning issue. We switch channels up and down, the headers appears, but we get no picture and limited noise.