All posts by i_bryn
Below are all of i_bryn's postings, with the most recent are at the bottom of the page.to Helena
http://www.frequencycast.….jpg
screw white cable into far left socket(see pic)
connect your Virgin Media V+ box to your telly using the RF aerial socket(see picture its the black cable)
Tune TV into to channel 52 to get V+ on screen.
Hold the up & down keys together & press reset.
Hold up & down keys for approx 15 secs until diagram is displayed.
Left & right keys move pages.
page 2 has RF setting.
Key down to RF setting then OK.
Up arrow changes from channel 52 to say channel 62. OK again.
Down arrow to save settings & reboot.
Retune TV to the new RF channel.
if TV has a scart socket (strange black block with holes in it there's 2 of them 1 below the other.plug scart lead into top 1(says tv)then other end of scart cable into tv.switch tv on then v+ on and it should auto switch to it.if you get stuck here's a good link
Cable TV in the UK Explored by FrequencyCast
plz excuse me if im doing this all wrong cheers all
(NG101GB)
| link to this comment |
Wednesday 6 February 2013 2:14AM
Nottingham
Daniel
Satellites over America can't be seen from the UK, since there is no direct line of sight