menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

All posts by Graeme

Below are all of Graeme's postings, with the most recent are at the bottom of the page.


I have tried all steps that relate to my problem as best I can; I get a "no signal 28" error message but only on BBC and ch5 if I go to the London ch for BBC1 Sometimes this works. If I am watching TV for more than about 5hrs the signal is weak (ie a broken pixelated picture)then appears to warm up. my setup is an old dish (1 lead) and a HD box, it used to work but this issue is getting worse.

link to this comment
GB flag

Hi, JB38; Yeah its Sky+HD and yes its single feed. the problem appears to get worse over time untill I go thru the steps!?

link to this comment
GB flag

thanks for the reply JB38, my signal strengh is about 50% and the quality is lower maybe 35% on a bbc ch (up to 95%strength and 85-90% on ch 4). Allthough this does vary quite a bit depending on what, I'm not sure other than the channel I'm on. Since the update I hve not put the card in, not sure what difference this makes?

link to this comment
GB flag

JB38 , Thanks for that will try the steps after work 2moro and keep you posted. Thanks again!

link to this comment
GB flag