News
TV
Freeview
Freesat
Maps
Radio
Help!
Archive (2002-)
All posts by Steve
Below are all of Steve's postings, with the most recent are at the bottom of the page.Hi Neil,
Nah, still can't get the HD channels, even when trying to manual tune. I am off to try the other 3 TV's to ensure its not device limited, but the TV I am using is a fully HD compliant TV, with HD receiver. I select manual tune to the frequency above at get zero channels on this TV....
:(
link to this comment |
What I struggle to understand is how I was able to get all of the channels from Sutton Coldfield prior to the power up and now they have put the power I seem to get less and still don't get the HD channels?
link to this comment |
All my TV's and boxes are the same, zero HD channels. I seem to be seeing all of the other channels, just not HD. Now I have an internal arial, which as I said has worked perfectly pretty much for years and has provided all of the channels available, any pointers?
link to this comment |
Carl, my box is only searching digital as that is the option I chose and I don't get all channels either...
link to this comment |
Neil I've done the factory reset thingy, nothing improved but wil have a look at the other route. Cheers.
link to this comment |
Nope that didn't work either, why is this really so challenging. OK, so I have duplicate channels, what are the chances that my arial is pointed towards the wrong transmitter?
I seem to also be channels down compared to where I was pre-power up, makes no sense this does it.
link to this comment |
Annoyed with the hole thing, will give it the next 24 hours then I shall call a man, get the entire system from arial to outputs, to devices out.
link to this comment |
Dennis I've done that and I am finding zero channels, which is what let me to wonder if I am actually pointing at the correct transmitter, though I am pretty positive when it was installed it was aimed at Sutton.
link to this comment |
Page 1
Wednesday 21 September 2011 11:05AM
I retuned this morning, living near Abbots Bromley and I have missing channels. You know, I just knew this was not going to work for me and I can't see the HD channels. To clarify, I have 2 3D TV's with HD receivers as I know that will be the first question, yes, they can receive, decode AND play HD channels. I was waiting for this day and at the back of mind I just felt it would not work :(
Worked fine before most of the time, now i see ZERO improvement.