Turn the power off at the mains socket. Either do this by pulling the plug from the socket, or using a power switch if there is one.
Remove the viewing card from the machine. Using a dry cloth or kitchen roll, clean the gold connector on the reverse of the card. Do not use any cleaning products.
Check cables and connectors are in good order.
Wait for at least 30 seconds.
With the card still out of the machine, plug the Digibox back into the mains.
Ignore all the messages, and wait for around a minute.
Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
Insert viewing card, wait a few seconds.
Check 104 for Channel 4 and 105 for five.
Wednesday 3 August 2011 7:58PM
above ^^^^
that worked...
Reset method 1 - Delete and Rescan
Turn the power off at the mains socket. Either do this by pulling the plug from the socket, or using a power switch if there is one.
Remove the viewing card from the machine. Using a dry cloth or kitchen roll, clean the gold connector on the reverse of the card. Do not use any cleaning products.
Check cables and connectors are in good order.
Wait for at least 30 seconds.
With the card still out of the machine, plug the Digibox back into the mains.
Ignore all the messages, and wait for around a minute.
Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
Insert viewing card, wait a few seconds.
Check 104 for Channel 4 and 105 for five.