All posts by Rob Mitchell
Below are all of Rob Mitchell's postings, with the most recent are at the bottom of the page.
Have also noticed the signal on one of the effected channel go's from high to nothing then straight back on. Is this the signal clipping because its too high? So confused on this one.
thanks for the help so far but more required unfortunately.
regards
Rob
| link to this comment |
Thanks David, might try that, really tricky one, like i say if i turn the signal down with the attenuator i then don't have enough signal for the other channels which are not effected. When did this signal get so strong. Don't understand it and why is it only on the one mux
| link to this comment |
R
Oxford (Oxfordshire, England) Full Freeview transmitterWednesday 15 January 2014 10:02PM
Kidlington
Jb, yes the tv is next to a wall of an adjoining property, plugged the set top Ariel in and moved as far from the wall and still has100% signal showing on the signal meter. Also put it onto the floor and still 100%. How does that work?
why is the interference only effecting the one mux?
| link to this comment |
R
Oxford (Oxfordshire, England) Full Freeview transmitterWednesday 15 January 2014 10:10PM
Kidlington
The signal is 100% with the set top, but still some interference but that could be cars, could this mean an Ariel replacement is required? Really confusing me.
| link to this comment |
R
Oxford (Oxfordshire, England) Full Freeview transmitterWednesday 15 January 2014 10:19PM
Kidlington
Does seem like less interference on set top Ariel. Still blipping but not as bad, still driving me mad, do i need a high pass filter?
| link to this comment |
R
Oxford (Oxfordshire, England) Full Freeview transmitterWednesday 15 January 2014 10:39PM
Kidlington
Update, started again with set top Ariel and really breaking up so back on main Ariel again. Might be some local interference but why only on channel 60 tv stations?
| link to this comment |
R
Oxford (Oxfordshire, England) Full Freeview transmitterWednesday 15 January 2014 11:08PM
Kidlington
Cheers David, have checked already but they say there is nothing online in my area at the moment. Could it be from the police headquarters or a baby monitor or something as we have new neighbors with a baby, there seems to be no pattern to it, but all on channel 60 only nothing else.
| link to this comment |
Thanks again jb for the advice, would this not effect my daughters tv running on the same Ariel? Also how would i get rid of these types of interference? Is there anything u can do? Or do i have to go to the expense of freesat?
regards
Rob
| link to this comment |
Daughters tv has 64 strength and 99 quality on bbc 54 and 99 on itv. Will try and get Sony upstairs tomorrow. Splitter in loft is just one from screwfix with no power.
cheers
Rob
| link to this comment |
Wednesday 15 January 2014 7:33PM
Kidlington
Jb38 just plugged in unpowered set top Ariel as suggested and 100 % on the effected channels still. However like i say how do i turn this signal down without effecting the other channels