All posts by Christopher Wilton
Below are all of Christopher Wilton's postings, with the most recent are at the bottom of the page.
Meant that we rarely lose the channels completely, but pick, e4+1 are just no longer there. Service not running, and with a retune the channels are not even listed.
| link to this comment |
Hi Mike,
I live on the PL10 area, near Cawsand. Channel 24 has now completely gone, no signal level at all.
I have tried re-installing as a first time, and still nothing. It's almost like ch24 has just stopped transmitting.
Cheers
| link to this comment |
MikeP: please explain how I do feedback, sorry I am very new to this site.
Ch21 no signal
Ch24 good signal now, signal quality none
Ch27 strong signal, good quality.
Had new aerial, aerial booster and wiring less than 12 months ago.
Signal on com 5 always seems to drop when we get high pressure.
Thanks for all your help so far. As soon as I know how to leave feedback, I shall do so. And it will be good feedback.
Cheers
Chris
| link to this comment |
MikeB: thanks for the reply.
The freeview manual tuning function has a bar for signal strength, which shows about 60-70%, but also has a signal quality which says none, poor, medium, good or very good.
Ch24 shows about 60-70% on the bar, but quality says none. It's hilly around here, so I am not totally sure we have direct line of sight.
Thank you for all the help.
| link to this comment |
Thanks for all the comments and help guys. Pick has now returned via a retune and ch24 is there but poor signal st
No changes to hardware, so I can only guess it's all atmospheric.
| link to this comment |
Thursday 5 May 2016 8:39PM
Carson hill seems to be putting out 70% signal on channel 24, but 0% signal quality.
Is there any explanation for this? Signal degrades when we have a high pressure,
But not a complete loss of signal.