News
TV
Freeview
Freesat
Maps
Radio
Help!
Archive (2002-)
All posts by Ewan Marshall
Below are all of Ewan Marshall's postings, with the most recent are at the bottom of the page.Accept I have receiving gear where I input the transponder frequency manually (ham radio operator), so having the correct transponder frequencies is extremely useful. So when I tune to frequency and can't get a stable signal lock I shouldn't have to be calculating and trying offsets manually.
And not all consumer tuners will manage to correct for an offset correctly (hauppage wintv cards don't, the scanner scans them all separately in wintv windows media center trying both offsets as we as the channel frequency reported for that transmitter, if you aren't using that software though, or manually inputting the transponder tables to scan on then one again needs to know the correct offset.
link to this comment |
Saturday 14 January 2012 12:04AM
According to here: http://www.ofcom.org.uk/s….pdf
Mux1 should be C34+ (578.2MHz) and MuxC should be C37 (602.0 MHz)
This I've confirmed here.