News
TV
Freeview
Freesat
Maps
Radio
Help!
Archive (2002-)
All posts by Stephen Phillips
Below are all of Stephen Phillips's postings, with the most recent are at the bottom of the page.So long as your 8-way is working that should be enough amplification. Are you sure it is powered and working?
Does your meter see a stronger signal with it in use than by-passed?
link to this comment |
MO'P - Just as a lookout scans the horizon for ships, your tuner scans the range of frequencies for ones that are sending a signal it can intrepret.
Nigel - are you trying an actual TV as well as the meter for the different conditions?
Do you still have your old box that worked?
Have you comparesd experience with locals?
link to this comment |
MO'P - Multiple aerials may well cause troubles with multi signals.
Can you try one by one and see what works?
UK digital TV reception predictor
Your strongest signals seem to be on higher channels than waek ones, which may get installed first
link to this comment |
According to
UK digital TV reception predictor
You may have multi-path trouble.
* - where the field strength is asterisked, there is a possibility of multipath reception effects. It might be worth trying again with a greater antenna height.
and it looks like you might do better with Nottingham
link to this comment |
Nigel I am no expert but IIUC the various elements of your aerial are intended to work as pairs at different frequencies, so unless you know what you are doing just removing some is unlikely to get results.
There is a lot to be said for paying a LOCAL installer for his local knowledge.
link to this comment |
Sharon have you got a satellite dish outside with a lead from it plugged into the box?
link to this comment |
Tuesday 15 May 2012 12:16PM
... UK digital TV reception predictor
You are a little weak for a loft. I assume a roof ae is difficult?
I think an amplifier might do the trick. But is your 8-way splitter not powered? 8-way is a lot for passive splitting.
Presumably you got good pics on analogue?
Did you try digital before switchover?