All posts by richard
Below are all of richard 's postings, with the most recent are at the bottom of the page.
You could be right with hidden cables as they where underneath the floor boards. When I saw them doing the works , they where left over cables. I'm unsure at this time if theses where removed or left, since they were old cable wires.
The only difference to the plug sockets what was rewired was made higher than they where before.
The joint wall to bedroom 1 and 2 is that after measuring from the wall to the plug socket both measure the same length. In other words back to back.
| link to this comment |
As asked I have placed the 4g filter in bedroom TV (Signal 84 quality 84)
I also did the same downstairs with the 6db attenuator ( signal 100 quality 95)
As u have advised me to do as in 4g filter between the aerial and the booster TV in bedroom goes down to signal 35 quality 0. This with the attenuator plus same with out in the back of tv in bedroom Signal 35 quality 0
Downstairs the signal hasn't changed much. 100 signal quality 84
| link to this comment |
Thank you mostly appreciated on your input,.
Would I be able to get hold of an at800. Ch 60 filter inregards to where I got this one from which was digital.uk
I do have a neighbor a few doors down that has an aerial pointing towards emley moor
He receives all his channels via a ee set top box. He does get all channels including sports and movies, but his TV is connected to his ee modem even though he has an aerial
I don't have any neighbors who's aerial is pointing to wards bilsdale, so I'm guessing I'm the only one.
| link to this comment |
Thank you very much for your help and support in this problem that I have. Muchly appreciated thank you.
This I'll do first thing the next working day and ring digital UK and as u said 4g filter ch.60 plus as u have mentioned only give some information into the problem but not all and hopefully this will cure the problem at hand.
I will endeavour to keep u updated once I have received the at800 ch.60 filter
| link to this comment |
Hi. i have an update for u. Due to the recent messages that keep popping up on tv in regards to a retune, to which i have done several times this morning. I can now confirm that i now have no channels on coms 5. signal and quality are both 0%. All the other channels and coms are holding at signal 92% quality 87%. This is on the tv 2 in the bedroom with 4g filter in the same place where it was all working before the retune. Down stairs tv is holding at signal 99% quality 100%.
Can u tell me if there is another retune happening on the 12th feb. This is because i have received a message on my tv that this is gonna happen on the day in question.
| link to this comment |
I started the retune this morning about 11am.
For a retune. It was at the time UHF 47. It then changed to UHF 33, then
Retuned again and it changed to UHF 43, then I retuned again
To which it is now UHF 44
| link to this comment |
Sorry I lost connection
BBC channels UHF 24 psb1
Yorkshire UHF 21 psb2
Coms4 UHF 51
Cons 5 UHF 52
Ls UHF 48
Coms 7 UHF 47
This is for upstairs
Downstairs I have this
PSB 1 UHF 51
PSB 2 UHF 52
Coms 4 UHF 47
Coms 5 UHF 48
Lls UHF 34
Coms 7 UHF 55
| link to this comment |
Only coms 5 has no signal upstairs.
Everything that is downstairs is working fine.
Neither TV can receive hd channels
| link to this comment |
Wednesday 29 January 2020 2:35PM
Just so that we both are aware of this problem it goes like this.
The way that I have it now for upstairs the 4g filter is in the TV and I get signal 84 quality 84.
When I place the 4g filter via the booster in tv2 coax I get signal 15 quality 0
If I place both 4g filter and 6db attenuator upstairs I get signal 35 quality 0 and the picture is pixelated.
If I place just the 6db attenuator in TV upstairs I get signal 35 quality 0 .
I have tried this in every way that I can.
Without the booster I receive no signal.
Is it just me or is there some kind of interference that just cannot be explained.
But when I do the same downstairs there is no change, besides a few channels where the quality is lower than it was as above message