All posts by r. bedford
Below are all of r. bedford's postings, with the most recent are at the bottom of the page.
I found the apparent solutions on another site whereby I accessed the 'hidden' menu. It told me to do a factory reset which would bring back the dtv option. I did this but am still left with atv. It was also suggested pressing the tv button a few times to enable it to switch from analogue to digital but this does nothing either. This factory reset actually takes you through plug and play but when that finishes I'm left with the same problem
| link to this comment |
Yes done this several times. My scan begins from channel 5. I'm not sure if that correct! I still end up with 0 channels. After this scan I'm still left on the atv setting too.
| link to this comment |
I have just tried another tv that I have been lent and all frequency was showing at as low as 17%. I can assume it's now an aerial issue. Apparently this is likely to be due to the midhurst transmitter. What is the next best move?!?
| link to this comment |
I have just looked up if there are any issues with signal strength as a lady at the customer helpline said it may have tried to lock on to a different transmitter.checking the other ones near me I can see that they are all low or poor quality strength. How do I make it pick up off the original transmitter that at the moment has a high signal strength. All cables ok. Problem,from what I can work out from neighbours I have spoken to, is limited to just me!! The customer service lady also mentioned that if I tried doing a
Rescan whilst midhurst was under maint I may have lost all channels as it tries to find another transmitter. All very odd and apologies for wasting anybodies time! Im just lost
As to what to do.
| link to this comment |
Thank you for all your help. Trying that search just results in a 0 channels memorised message.
| link to this comment |
Yes it wont switch to dtv. I followed some instructions on another site that mentioned factory reset but doing this didn't change anything
| link to this comment |
None. In the past if I pressed it the tv would switch between dtv and atv but now it does nothing
| link to this comment |
Sunday 13 October 2013 3:37PM
Horsham
I thought that might the case but when I press tv. Nothing happens and there is no dtv option