All posts by Eddie
Below are all of Eddie's postings, with the most recent are at the bottom of the page.
Thanks for the advice, I have run tests, in the kitchen I have used the standard box on cable 1 signal strength 90% quality 50%
Then swaped to cable 2 signal strength 90% quality 50%
In the lounge the hd box gives readings of input 1
Signal strength 75% quality 25%
Input 2 signal strength 60%
So all seems fine?
| link to this comment |
Tuesday 28 February 2012 7:34PM
I have just upgraded my sky + box to a new hd box, new box installed and working fine. I had a standard sky box in the kitchen which I have taken out and replaced with the sky+ box, I have run a second cable so I have two inputs. The problem is the sky+ box says I have weak or no signal, I have tried connecting the standard box to both cables individualy and it works fine, so I assume cables ok....I then tried the sky+ box back in the lounge and it works fine, sky box ok.... Try back in kitchen weak or no signal... Repeat exchanges still same. Really scratching my head now!!! Any ideas please!