All posts by Mazbar
Below are all of Mazbar's postings, with the most recent are at the bottom of the page.
Steve p 18db anttenuator still no good found out today the change of aerial has made any differance
| link to this comment |
Jb going back on sunday the mast is only very short about 2ft as that was all that was needed so i'm going to try a 5 ft mast and replace the coax if this dosnt work god only knows what im going to do
| link to this comment |
Sit sep customer called last night to tell me he had a new tv delivered and everything seemed ok i dont think so but i will wait and see. Went to another customer there itv was breaking up changed everything nothing helped put a set top box everything fine i have all the luck
| link to this comment |
Clive the only reason to do it with an octi lnb is cost to use a multi switch amp to run to the 4 receivers could cost anything upto £1000 i think what was done was a lot cheaper
| link to this comment |
Paul first unplug the aerial and then do an auto tune to get rid of all the channels. Then do a manual tune using the channel numbers 54, 55, 58, 59, 61, 62. After this has beem done switch off the auto update so you dont get the message telling you there are new channels. Hope this helps
| link to this comment |
Tina is the tv conected to an external aerial or an indoor aerial , if it is an external aerial you should have it checked if it is an internal aerial try getting an external aerial.
| link to this comment |
Thursday 19 January 2012 2:29PM
Hi can i get some help from the aerial riggers on this site. I have just come back from a recall i fitted an lp45 log periodic aerial down to a class a splitter in the front room short lead and a run to back room signal strength on all multiplexs is 70 to 77 dbuv after the splitter ( not amplifer) the problem is the picture is breaking up very bad on the samsung own signal strength it is going to 10 on the quality it should be 0. Have changed the aerial to a sr12 yagi type aerial this seems to have cured the problem. What i want to know is what could be causing the problem . Other information no trees in the way and i can see winter hill from the roof cable changed when the job was done last week, any help would go down great .