All posts by G. Hadley
Below are all of G. Hadley's postings, with the most recent are at the bottom of the page.
Yes, COM7 ch32 was back to normal when I checked at 2:15pm 7/2/18 actually , I suspect it was maybe something to do with how the digital signal is identified or flagged so that receivers know how to handle it.
| link to this comment |
COM7 Ch32 Emley Moor is not being recognised by my Humax box or Sony TV as T2 so I cannot recieve any channels from COM7 . This same problem happened a few months ago , I suspect something wrong with the identification of COM7 as it has a mix of HD snd SD channels. Last time this happened it was corrected after a few days, I hope the same correction occurs very soon, I'm sure I'm not the only person with this problem.
| link to this comment |
Thanks Mike, but I'm 100% sure that this is not a tuning issue, the receiver(s) are tuned to the correct channel CH32 , the issue is that the receivers do not recognise COM7 as a T2(HD) or standard DVB(T) broadcast they simply don't 'see' the digital broadcast on that channel at all, I'm sure it is an issue with the identification of the signal. The exact same thing happened in February and within a couple of days (after I posted on here) the issue was resolved.. until now
| link to this comment |
Wednesday 7 February 2018 11:45AM
I am unable to receive channels on COM7 ch32 on my two SONY tv`s and one HUMAX freeview box, though I have another HUMAX freeview box (different model) which does receive COM7 ch32 perfectly. I have tried two different aerials and retuned and replaced connecting coax cables but still the same problem exists. It seems that the two SONY TV`s and one HUMAX box are recognising the signal as DVB-T2 at all.All other channels are good, I have excellent signal as I live in line of site and only a few miles away from the Emley Moor mast. The problem has only recently occured, all channels have been working fine for years previously