All posts by Kevi Fagan
Below are all of Kevi Fagan's postings, with the most recent are at the bottom of the page.
Thanks. My aerial is a flat low gain type, this was because of ghosting on the old system. After the switch over it has worked perfectly. The signal showing is 78%. How do I do a 'full reset'?
| link to this comment |
Hi, did the reset, still the same. Signal is back at 78% but the error bit rate keeps moving all the time!
| link to this comment |
Hi KMJ, I cannot get to the angus transmitter because of location. I will try moving the aerial position.
Why would it have been okay for months and just start last week? I thought it could be something to do with the additional channels that the BBC are operating just now, more/less power? Any thoughts?
Thanks in advance.
| link to this comment |
Hi JB, aerial looks okay and is mounted on the vertical. All the other TV's are okay, there are 4 in regular use? I have done the picture test on the one that is pixelating and it's no problem.
| link to this comment |
Hi JB, Splitter is powered, fitted in the loft, 1 input/6 output. TV is Samsung UE40D6510W LED 3D TV, 40", Freeview HD, Wi-Fi. Signal is still 78% error bit rate continues to fluctuate. Aerial is fitted at roof height on a two storey house but we are at river level. Thanks.
| link to this comment |
Saturday 28 July 2012 10:44PM
Hi, since Thursday 26th July, I have been getting pixelation on the HD channels from the bridge. Signal is 78% but error bit rate fluctuates from 200 to 2000, is this a transmitter issue?
I have tried retunning.