How to get Sky News on a Freesat box
On the set-top box:
Press [MENU] then [DOWN] twice, then [RIGHT], [DOWN] again to highlight "Manual Tune" and press [RIGHT].
On the menu scroll [DOWN] to "Transponder" and then use [DOWN] to find the value "12207V 27500 A".
Scroll down to the "Search" button and press [OK]. Tuning takes a few seconds to complete and press the [SAVE] button.
The set-top box is now in "non-Freesat mode". Press [EXIT] to see the TV picture, which will be Sky News, unless you have already added other channels, when it will be on the highest channel number.
To return to normal Freesat mode, press [MENU] again, and in the "Settings" menu, choose "STB Mode" and select "Freesat".
You can add any channel listed as free-to-air from this list: Eurobird 1 & Astra 2A/2B/2C/2D at 28.2E - LyngSat
12:11 PM
Luton
Are there any specialist sports channels available on freesat via 'add non freesat channels.' If so could someone list the important manual tune numbers please. Any would be appreciated, thank you.
link to this comment |
Dan's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
when are they going to be more channels coming to free sat how can i get more channels keep saying going get channels but dont see any
link to this comment |
leslie rainer: there quite a lot more music channels now, the section has expanded a lot in the last few months.
link to this comment |
11:03 PM
I have no volume in my bush freesat.
Can you tell me how to fix this please?
Everything is plugged in and the volume on the tv works with DVDs
link to this comment |
11:35 PM
Becky: Have you advanced the volume control of your "Freesat boxes remote control" to around 80%+ or so minimum? as the volume control levels on any equipment connected into a TV have to be kept around this level or they will appear to be very quiet when compared to the TV's normal levels when not using external devices.
If though you have already done this, then have you double checked that the cable connectors (scart or HDMI) coupling the Freesat box into the TV are fully inserted into their respective sockets.
Should you have tried that mentioned and the situation has not changed, then please supply the model number of the Freesat box in question.
link to this comment |
12:05 AM
Peterhead
jb38: I have tried all of the suggestions. It was working fine before but now I have no volume and have lost my itv and e4 channels.
My model number is 01
I have also done a reset and nothing has changed with this either
Any help is appreciated
link to this comment |
Becky's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage
12:37 AM
Becky: I take it that you are referring to a Freesat satellite box? and if so is it a Bush?
If though it is, then carry out a signal strength & quality check and report back on your findings as far as the levels being indicated are concerned, approximate percentage levels are suffice as its nearly impossible to lose programmes such as you have mentioned on a satellite device.
By the way, if it is a Bush then the signal strength indications are seen on the "information menu".
link to this comment |
12:42 AM
Peterhead
jb38: yes it's a bush freesat box
The signal & quality strength is 100% on the channels I have a signal with but it's 0% on all itv and e4 channels
link to this comment |
Becky's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage