How do I change the RF output channel on a Sky Digibox?
Brian Butterworth published on UK Free TV Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]
Then press [4] to go to the RF output menu.
You can now change the value so that it does not clash with an analogue TV channel or a Freeview multiplex.
HD and "new EPG" boxes
If you have a HD box, press [SERVICES] button and then press [0] [0] [1] then [SELECT]. Nothing is shown on the TV screen until you press the Select button.Then use the [RIGHT] arrow button on the remote until this screen is shown, and press SELECT to change the values:
All questions
In this section
Tuesday, 11 January 2011
Alan: OK, so it's not that. Can you try using a different RF channel?
| link to this comment |
A
Alan7:21 PM
thanks for quick reply,have tried this last night and sky keeps turning off the second tv.itis on chanel 21.thought it might be some interference from something next to it but nothing else pluged in
| link to this comment |
Alan: I could be, there are things too look at on Freeview intermittent interference | ukfree.tv - independent free digital TV advice .
| link to this comment |
A
Alan8:02 PM
Briantist, have everything switched off now including mobile and still same noise any more solutions would be great
| link to this comment |
A
Alan8:10 PM
didnt know that this could be used,need to head out now so will try tomorrow.thanks brian will be in touch tomorrow
| link to this comment |
Alan: The Magic Eye won't work on RF1, but everything else is the same.
| link to this comment |
Wednesday, 12 January 2011
M
mr bethell10:15 PM
can i connect a coaxial cable straight from sky box to another tv and get a picture, i know i want get remote controll to work but can i get a picture?
| link to this comment |
Thursday, 13 January 2011
mr bethell: If the "other TV" has analogue RF input, then yes. If you want to use a remote, use the RF2 output of the Sky box and a "Sky Magic Eye".
| link to this comment |
Friday, 14 January 2011
A
Anna Plummer9:20 PM
Hi,
My TV in the lounge has been connected to the TV in the bedroom (also the one in the kitchen) and I am now trying to install an eye on the bedroom one. Have connected as per the diagram, the red light does not come on and when I tried to tune the bedroom TV into the Sky box's RF channel I have now completely lost all my channels, oh dear, I will not be popular. My question is: what have I done? And why does the eye not work? There is a cable that runs from the loft into the back of the sky box, plus the main aerial from the loft into the sky box. There is also another lead which comes from the loft into the back of the box, but as it gets to the sky box it splits into two and there are then two separate things plugged in - I presume this is because there are two TVs connected to the SKY box? Can anything be done? Or was this a complete waste of time and money!
| link to this comment |
Select more comments
Your comment please