menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

All posts by David

Below are all of David's postings, with the most recent are at the bottom of the page.


...about to re-power the mrd I checked the signal and it has returned to 100% quality and 94% strength which is as it has always been......hmmmm....wonder if it will last???

link to this comment
GB flag

Hi, a question for you.... Tonight freeview 86 was breaking up left right and centre, all the other channels on that mux group (com 7) apart from BBC4 HD were doing likewise.

All other muxes and channels were OK so I looked at the signal strength and found it to be between 94 and 100 on ALL channels largely irrelevant I know but it's a good indication....I then looked at the all important quality and on all the other muxes it was between 96 and 100 but on com 7 it was varying between zero and around 40, I localised down to the interlinking cables between the two freeview recorder boxes and the f/v box to the TV.

The cables are all high quality WF100 dual screen braid with a copper foil and all soldered to nickel plated brass male / female plugs as required not being pig-headed but I do know how to make those up properly....I've done enough of them

link to this comment
GB flag

Chris.SE:
thanks....all seems good today - 100% quality on all channels
looks to have been an issue with the connections on the outer / screen...I tightened up all the outer rings and the problem has gone....for now!

link to this comment
GB flag

david:
and I get the same error when I try to subscribe to messages..... and I never get notified of any replies

link to this comment
GB flag
Page 2