News
TV
Freeview
Freesat
Maps
Radio
Help!
Archive (2002-)
All posts by bruce tearle
Below are all of bruce tearle's postings, with the most recent are at the bottom of the page.Hi Chris
Thanks for response.
The channels I have are:-
1.2.11.12.16.17.19.20.21.25.26.27.30.32 7 44. There may be more above 44 but have not gone there.
Thanks again.
Bruce
link to this comment |
Hi Chris
Problem solved. It was a problem with my Freeview box. After lots of playing around have got it sorted. The 'good-woman' is not happy as she now has to fins all the programs that she had planned to watch/record!!!
Thanks again
Bruce
link to this comment |
things are back to normal, guess it must have been the atmosphere!!!!!!!!!!!!
Msg appearing on Pick indicates that there is a need to retune to ch34 but when I try this I get nothing!!
Has it moved or not?
link to this comment |
Just looking for help & suggestions!!!!!!!
Can no longer get any BBC channels on my TV. All others tried [ITV, Channels 4&5, UKTV, etc.] are coming through fine. My set-top box is a HUMAX; I have tried a factory reset on this without any success. Any & all suggestions gratefully received?
Regards
Bruce
link to this comment |
My location is Yeovil.
I have recently lost all BBC stations being broadcast on Medip Channel 32.
I have tried a manual tune of Channel 32 with no joy. This morning signal strength was 68% with quality at 100%.
I had previously tried a factory resent of my Humax set-top box.
This morning I tried the procedure to clear my box but still have no BBC channels.
From the box start menu, I can load I-player but from that front screen any programme selected will not select. The buffer' wheel rotates but after a short period I get the problem screen.
Any ideas and suggestion would be very welcome.
All other Mendip Channels appear to be functioning correctly. It is only channel 32 that is not functioning
Regards
Bruce
link to this comment |
Chris
Thanks for info & help.
The solution [in the end] was very simple. My Humax box was 'daisy-chained' through a couple of other pieces of equipment before connecting to the TV. Taking these out of circuit solved my problem. Now with the Humax box directly connected to the TV I have all channels available.
Thanks again for help.
Regards
Bruce
link to this comment |
Thursday 23 July 2020 5:46AM
Yeovil
Have lost channels 1 [BBC1] this morning. First channel I can receive is channel 11 [pick]. I have tried the reset instructions and a different aerial input to my system - NOTHING.
Receiving normally from Medip Transmitter, my post code is BA21 4nw