All posts by richard
Below are all of richard 's postings, with the most recent are at the bottom of the page.
Morning.
Righty both lg TVs are the same. 32inch 720p even down to the same serial number.
When I tried the TV downstairs and plugged it upstairs I get 15% and 0% ... I plugged the TV upstairs and plugged it in downstairs I get 100% and 84%
From my location to which over looks kirkstall abbey my aerial is pointing in that direction...
Ok the booster is plugged in upstairs. In one of the bedrooms. The aerial is on the roof. It goes via the wall in the brickwork and co-axed into the booster. The booster is a X2 TV with a max 20db output. TV 1-TV 2.
Tv1 which is downstairs TV 2 is upstairs. 2 TVs via 1 booster via X1 aerial both on a direct link to the same area of the nearest transmitter . Both TVs where before having a complete rewire done working and giving out the same signal and quality .
Now u asked the question of swopping aerials round as in tv2 into 1 and tv1 into 2. By doing so I get the same . No change.
The 4g actuator was plugged in due to mobile phone interference. It has been plugged in since I had it. I removed it all because I thought it was that. By troubleshooting the problem at hand.
The council who go around and check with all properties and talk to home owners inrespect to the last time it was renovated, as in full rewire done. To which wasn't done in 20 years. So they did a full top to bottom a complete rewire done. Lights, plug sockets, main fuse board.. I know for a fact that I didn't have this problem before they started the works, but since it has been done ,. This is the problem to which I have now.
I have replaced the coax connections upstairs and downstairs and to the aerial to which all connects to the booster.
The rewire started on the the 8th Jan it was a 8am till 5pm a full day .... As I stated downstairs no problems upstairs a problem to which I cannot work out
Hope this helps. Besides dust nothing else was moved, they where no damages, splits of any kind.
| link to this comment |
Hi and thank u for Ur responds.
The aerial is wall mounted. The coax is running down the wall and throu via the wall (corner of the window frame) and the clipted to the scurtinboard direct into the booster.
The digital coax is one piece around 3metres in length from booster into TV upstairs.
The coax from booster to TV downstairs is also one length around 10 meters in length. Both coax have not been split, cut, bent ,crushed in any way. The aerial coax via the wall has also been checked, no bends, crushed, split of any kind.
U asked the question on unplugging the coax from downstairs and see what the signal is on the upstairs TV. No change. Still the same.
Both aerials u can see at all time.
North eastly direction over kirkstall abbey the aerial is pointing
| link to this comment |
For those that want to know direct as in location and directions here u are.
Bilsdale distant. 67.423km
Bearing. 26.91
Pole H
Aerial group A
Signal full 100%
| link to this comment |
In regards too what channels I receive I get all except for PSB 3 bbcb. Basically no hd channels and coms8
From my reception.. this is because I am in a dip and my aerial cannot be guaranteed in picking up reception in a sw direction , this is due to high homes and surrounding trees etc. of emely moor transmitter
| link to this comment |
With a short fly lead from TV in bedroom to booster and tv1 disconnected I get no change in signal and quality
| link to this comment |
ok... everything is connected up as normal.... tv1 downstairs is connected and tv2 upstairs is connect.
the 4g attenuator is plugged via the tv. this time and not the booster. i dont get 15% signal and 0% quality.
this time i have signal 84% quality 84% via the tv
| link to this comment |
the 4g filter is (at800 404401 LTE consumer channel 59)
the attenuater i still have it. I have tried it downstairs and connected it straight into the tv coax and the signal has not changed.... (signal 100 quality 97) some channels are signal 100 quality 85..
Upstairs via the tv (signal 35 quality 0) picture is pixelated.
4g filter via the booster input aerial in to which is then connected to both upstairs and downstairs signal upstairs as (signal 15 quality 0) (downstairs signal 100 quality 95)
when i place the 4g filter between the aerial as in tv1 (downstairs) there is no change signal and quality as above... i then placed the 4g filter in tv2 aerial to (upstairs) signal 35 quality 0
you then asked for me to put the 4g filter and the 6db attenuater together into the aerial input so that there should be some kind of a signal diffrence
well downstairs the signal is 100 quality 95.......... upstairs the signal is 35 quality 0
hope this helps
| link to this comment |
i have put everything back as i had it without the 6db attenuater and i have placed it with the 4g filter into aerial in tv2 (upstairs) and i have signal 84 quality 84
I seem to get a low signal and quality with it when it is inplace
| link to this comment |
Thursday 16 January 2020 1:09PM
If i had muxs problems with signal break up then it would be the same down stairs, but i have no picture break up or interferance of any kind downstairs
the ariel is on the roof pointing towards tyne tees area apparently this is the stronges signal that i can get from my location
Regards to your question on removing the booster I'm afraid to say that when i do i get no signal at all