All posts by Briantist
Below are all of Briantist's postings, with the most recent are at the bottom of the page.
lee: Please see the Freeview intermittent interference | ukfree.tv - independent free digital TV advice page.
| link to this comment |
shar: Only a Freeview HD set, or a BT Vision Box has the ability to decode MPEG4, which is used by some channels in France.
A "standard" digital tick UK TV will not have that ability, and will only provide the sound for such channels.
You can use a French set-top box with a digital TV, of course.
| link to this comment |
Bob: Yes, this is a common situation at switchover - too much signal is as bad for digital reception as too little.
Remember to remove amplifiers first, before fitting attenuation devices.
| link to this comment |
John Beever: I would give this - My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice - a go with your set.
| link to this comment |
Just as a general point, if you have problems with a box or set, do this - My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice .
| link to this comment |
General note - if you are retuning you must do a "first time installation" or do this - My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice . An "add channels" will only confuse your receiver.
| link to this comment |
=== 2011 switch-overs start today at Sandy Heath, Nottingham | ukfree.tv - independent free digital TV advice ===
| link to this comment |
Wednesday 30 March 2011 1:57PM
Mike Dimmick: Yes, I was considering the 550-614 MHz band in that respect. One very good use would be for SFN HD versions of the commercial multiplexes.