All posts by Briantist
Below are all of Briantist's postings, with the most recent are at the bottom of the page.
g.evans: See Sandy Heath digital TV transmitter | ukfree.tv - independent free digital TV advice - "The commercial multiplexes at Sandy Heath will remain on their pre-switchover channels and powers for a period after digital switchover. SDN will then temporarily move to channel 31 (at 20kW ERP) on 31 Aug 2011, before adopting its final allocation of channel 51 on 18th April 2012. Arqiva A will adopt its final allocation of channel 52 on 23 Nov 2011. Arqiva B will temporarily move to channel 67 (at 20kW ERP) at switchover and then it will adopt its final allocation of channel 48 on 14 Sept 2011"
| link to this comment |
N Omara: Please see Single frequency interference | ukfree.tv - independent free digital TV advice .
| link to this comment |
Sforeman9: Have you tried My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice ?
| link to this comment |
Stewart Crowe: I would look at the Freeview intermittent interference | ukfree.tv - independent free digital TV advice page.
| link to this comment |
Tracyy: If you use Wenvoe, as it says above, you must do a "first time installation". If you won't use Wenvoe, no.
| link to this comment |
Nathan Quinn: As above, "The commercial multiplexes at Sandy Heath will remain on their pre-switchover channels and powers for a period after digital switchover. SDN will then temporarily move to channel 31 (at 20kW ERP) on 31 Aug 2011, before adopting its final allocation of channel 51 on 18th April 2012. Arqiva A will adopt its final allocation of channel 52 on 23 Nov 2011. Arqiva B will temporarily move to channel 67 (at 20kW ERP) at switchover and then it will adopt its final allocation of channel 48 on 14 Sept 2011."
| link to this comment |
Lang: Are you sure you have a DVB-T2 tuner, and not just a DVB-T tuner with MPEG4 decoder software?
| link to this comment |
Gerald C. May: Sorry about the delay, I thought the software would do it automatically.
| link to this comment |
Wednesday 27 April 2011 5:37PM
Mike Dimmick: Sorry, I thought that was tonight, apologies.