All posts by Stephen Darch
Below are all of Stephen Darch's postings, with the most recent are at the bottom of the page.
Thanks for your reply I have checked this and there is no indication on input 1 or 2 hence the confusion as when I attach the feeder to the smart tv I get a great freesat pic with no problems
| link to this comment |
As suggested I have tried your suggestions and I left the box powered of all night. Still no change this morning with slky, freesat working fine so once again dish receiving a good signal on all feeders. Could an obstruction be causing the problem as. Freesat I have is tuned to a euro bird satellite, not Astra
| link to this comment |
I checked all of these values and reset as suggested, I have now got my neighbour to trim his tree so that it does not block me. I have now got a full signal but the quality is quite variable with the max being 50% even though I have a clear view to the horizon. Would the skew angle for the lnb have an effect and if so what should it be. I also have a 40mm clamp on the lnb should it be holding in the middle or to front or back
| link to this comment |
Thanks for your comments it's all very confusing what is going on here with my installation. I am going to give it a rest now for this weekend as the tv is just about working. As I have more time next week end I will work through all elements and try and find the weak spot . Once again many thanks for all your advice.
| link to this comment |
Saturday 27 July 2013 10:09PM
I have been having this no signal message on both my sky HD boxes since last Thursday morning. I have tried every tip I can find and nothing sorts the problem. What is really strange is that if I connect any of the dish feeders to my smart tv wich has an inbuilt freesat tuner this works fine