menuMENU    UK Free TV logo Freeview



Click to see updates

Do I need to buy a booster?

With analogue television, it has often been necessary to buy an amplifier to improve the quality of the television picture, or to supply a steady on several televisions fed from the same aerial.

With analogue television, it has often been necessary to buy an
published on UK Free TV

With analogue television, it has often been necessary to buy an amplifier to improve the quality of the television picture, or to supply a steady on several televisions fed from the same aerial.

Many people have asked if it necessary to investing in a signal booster for Freeview.

"Analogue television" means is that the sound and pictures are broadcast using signals that are an "analogue" of the input. The sound and picture are transmitted from the source as electrical signals, then as radio waves and then back to sound and picture again.

In an analogue television camera, the image is scanned 25 times a second from side to side, from top to bottom and back. Where a lot of light is scanned, a high voltage is produced. Where no light is scanned, no voltage is produced. The output voltage is the same ratio to amount of light at scanned.

Leaving aside the technically, this signal is sent to the transmitter. The transmitter emits a radio wave on a known frequency, which is varied by the incoming voltage.

A microphone also converts the sound vibrations it picks up into a voltage, which when sent to the transmitter is added to another radio transmission frequency.

The signals are received by a television aerial pointing at the transmitter and converted back to very weak electrical signals. The sound is amplified and sent to a loudspeaker, and a picture created on the TV screen.

So on an analogue television, if the incoming signal is weak then the picture is dull as the background noise (the snow scene seen when an analogue television is not tuned) makes the picture less watchable.

The best analogue television set equipped with a great TV aerial located near to a high powered transmitter will produce brilliant pictures and clear sound. A poor set with an inadequate aerial or substandard cable will not.

If a weak signal is fed to a booster device, this will make the picture appear better on the television set or sets. It is often worth the investment.

Digital television

In a digital studio, the voltages from the cameras and microphones are not sent directly to the transmitter. It is converted into a stream of numbers inside a computer. The input voltage relates directly to the number in the computer. By sampling the input at a regular frequency, it is therefore possible to both store and transmit the information digitally this is what computers are good at.

It is therefore possible to take these numbers and generate a sound and picture output from them. However, the amount of information generated is over 240Mb/s, 30 times the rate of the fastest broadband connection.

Buy using computational techniques on this information the data can be compressed to as low as 2Mb/s, with as little as 6Mb/s being required for a good quality picture. These data compression techniques are called "lossy" because the reconstructed images are not identical to the originals, but look virtually similar to human eyes.

Digital television uses the same transmission frequencies as analogue uses, known as C21 to C68. The digital data is sent using a system called COFDM (Coded Orthogonal Frequency-Division-Multiplexing) which can carry data at a rate of 18Mb/s or 24Mb/s. Several television channels and some radio stations can be multiplexed together to produce exactly this amount of data.

At the receiver, it must be able to decode every single bit from these transmission multiplexes. A single error is impossible to correct for, so the decoder must have no errors.

Until switchover happens, the Freeview signals are being broadcast at very, very low power levels. However the COFDM system and sensitive digital equipment will, as long as the signal can be found and decoded there will be pixel-perfect reconstruction of the television channel. If the signal is drowned out by interference (especially from analogue transmissions) then no picture or sound will be output.

If the TV aerial installation you have provides you with all the Freeview channels, there is nothing to worry about.

If you are missing some channels because the signal is just too weak the best place to start is by improving the aerial, see Freeview reception - All about aerials. A bigger, higher, better designed aerial will always be the most sensible way to get perfect reception.

If you want to supply a signal to several sets, where the incoming signal is being "split" to serve several Freeview boxes, a masthead amplifier will be effective. This is because the signal is already of good quality and is being repeated for several sets.

However, if you are not getting a good signal from your aerial, a booster by the TV set will probably not help as this will simply boost the background interference as much as the Freeview signal.

In circumstances where an amplifier that has improved a picture on an analogue, it may be unsuitable for Freeview reception. Sometimes they will block one or more multiplex, where disconnecting the amplifier will restore the channels.

Help with Television sets?
Why are all TVs on sale not digital?1
Do I still have to pay for a TV licence?2
I had perfect channel 5 reception - until I got a digital TV box!3
I Have a Pocket Tv For taking out so I can keep up with news and sport. Will thi4
The pictures from my digital box are all green!5
In this section
Loft aerials1
How to receive Freeview on your PC2
Indoor aerials3
Whole house digital TV4
Connecting it all up5
Now and Next6

Sunday, 13 March 2011
11:15 AM

I have an analogue aerial and a digital tv the weather seems to affect the picture. When switched on the picture will come on for a few seconds and then only sound. Some days it works fine. Do I need a set top box or booster. I do not wish to change the aerial.

link to this comment
Carol's 1 post GB
Monday, 14 March 2011
Tom Fletcher

11:08 AM

contact a local aerial fitter and get some quotes for a new aerial and cabling don't go wasting your money on boosters they don't work!
Tom Fletcher Alpha Aerials Sheffield.

link to this comment
Tom Fletcher's 73 posts GB
Tuesday, 15 March 2011
j lindsay
3:26 PM

got new flat screen tele with freeview but sometimes on some freeviw channels the picture breaks up and the screen goes blank for a second we have a booster going into the bedroom tele what can we do john

link to this comment
j lindsay's 3 posts GB
Wednesday, 16 March 2011
Tom Fletcher

12:22 AM

call a local aerial fitter and get a new aerial fitted,then you can throw the booster in the bin and you will not have any more problems.

link to this comment
Tom Fletcher's 73 posts GB
Thursday, 17 March 2011
j lindsay
3:19 PM

thank you tom for answering our query, we got our aerial guy who had put up our comunial aerial up 4 years ago he says it is getting blocked by something and does not know what what do you think john

link to this comment
j lindsay's 3 posts GB
Friday, 18 March 2011
Tom Fletcher

5:35 PM

J lindsay do you mean like trees or a building is in the way? ask your next door if they are having problems with there aerials,he should bee able to re-site the aerial if that's the case. Tom Fletcher Alpha Aerials Sheffield.

link to this comment
Tom Fletcher's 73 posts GB
Saturday, 19 March 2011
4:48 PM

hi installed a freview box downstairs and it worked fine tried to add 2 more boxes in the bedrooms and now i can only get one box to work at a time. is it just a case of adding a signal booster? thanks in advance luke

link to this comment
luke's 1 post FR
Tom Fletcher

7:03 PM

Sorry no there's a bit more to it than that,first of all boosters are no good for digital reception, if the signal is no good from the aerial its no good fitting a booster ,if you want to run more than one TV from one aerial you will need a mast amplifier system fitting,the first thing to look at is your aerial,that is were the signal comes from, if that is not up to the job you are wasting your time and money fitting any type of boosters,get a local aerial guy to come and give you a price for a mast amp system . Tom Fletcher Alpha Aerials Sheffield

link to this comment
Tom Fletcher's 73 posts GB
Thursday, 7 April 2011
10:15 AM

My dad lives in Eastbourne and the reception is bad. He cannot get e;g; channel 10 on freeview (new Box) which is worse than his old one. He has had a new areial but still not much luck does he need an even more powerful arial?

link to this comment
Susan's 1 post GB
Mike Dimmick

6:17 PM

Susan: The problem may simply be that he's out of coverage. Could you provide a full postcode, so we can see the predicted coverage?

Eastbourne has two relay transmitters, one on top of South Cliff Tower (called Eastbourne) and one on top of a newer development (called Eastbourne Old Town), which appears to have been added when that development was constructed. These relays were added because Heathfield doesn't cover the whole town.

Both relays currently only broadcast analogue signals: BBC One, BBC Two, ITV1 and C4.

At switchover both relays will be 'Freeview Lite' transmitters, transmitting only the three PSB multiplexes. They will both transmit at higher power levels than their current analogue levels - normally digital power is one-fifth of analogue, but Eastbourne will be slightly higher and Eastbourne Old Town double the power.

Heathfield's current digital signals are much, much quieter than the analogue transmissions. It's possible they just don't extend out to Eastbourne at present. The power boosts for the Eastbourne transmitters suggest that they won't be great after switchover either.

link to this comment
Mike Dimmick's 2,486 posts GB
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.

Privacy policy: UK Free Privacy policy.