menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

Switchover starts in the Oxford area

If you live in the Oxford area your digital switchover starts this week, with two weeks before analogue stops forever and high power digital replace it.

If you live in the Oxford area your digital switchover starts t
published on UK Free TV

This week sees the first stage of the digital television switchover for 415,700 homes in the Oxford area - one year after the only true problem during the whole of the UK pre-switchover process, the Oxford transmitter fire.

From 6am Wednesday 14th September 2011, you must to a perform a "first time installation" retune (sometimes "Factory Reset" or "Shipping Condition") on your Freeview box or television set if you use the Oxford full service Freeview transmitter.

This is because the old low power "multiplex 1" BBC service (on C34) will be replaced by the high power BBCA multiplex on the old analogue Channel 4 frequency, C53. Analogue Channel 4 moves to C63 for two weeks. Also multiplex C will move from C48 to C34 for two weeks as well.

If you use the Ascott under Wychwood (3pm), Charlbury (noon), Guiting Power (9am), Icomb Hill (9am) or Over Norton (9am) relay transmitters from mid-morning on Wednesday 14th September 2011 you will be able to receive the BBC Freeview services (with the exception of HD) for the first time, and you will no longer be able to view BBC TWO on analogue.

 Oxford transmitter group

You MAY find that old equipment will no longer work - see TVs and boxes that do not support the 8k-mode

Another common problem at switchover is the ten-fold increase in signal from 10kW to 100kW will overload amplifiers and over-the-top aerial installations. If this is the case you will have to remove the booster or amplifier from the system, or perhaps fit an attenuator if you have no amplification.

Leicester

On Wednesday 28th September 2011 will see the second stage of switchover, which provides the final Freeview configuration, including Freeview HD for all transmitters in this region.

On this date, you will need, once again, to do a "first time installation" as indicated above.

If you are over 75, you should already have been supplied new equipment by the Switchover Help Scheme.



Help with Freeview, aerials?
How do I get a test card with Freeview1
I would like to know if it is possible to receive UK terrestrial Freeview servic2
I have been told I would receive too much singal from my Freeview tansmitter as 3
Can my Freeview box receive more than one BBC and ITV region?4
Is it true that my 87 year old mother is entitled to a FREE upgrade when the ana5
In this section
Should the UK close down the TV networks to allow for more mobile broadband? 1
UK Digital switchover ends - Northern Ireland completes on 24th October 20122
The last day of analogue television in the UK - goodbye PAL3
2 days left of analogue television - goodbye teletext4
3 days of analogue to go - goodbye to NICAM 7285
Changes to Saorview frequencies and power levels, 24th October 20126

Comments
Thursday, 15 September 2011
M
Mike Dimmick
sentiment_very_satisfiedPlatinum

7:30 PM

Dawn: For other suggestions, see Digital Region Overlap. The only real solution is a new box that tunes in best quality signals and/or asks you which region to use if it picks up more than one.

link to this comment
Mike Dimmick's 2,486 posts GB flag
S
Stan Ball
8:20 PM

Just noticed that another Freeview channel we used to regularly watch PICK TV that was on Channel 11 in this area is also now missing from the new Channel List. Any ideas from you knowledgeable people ?

link to this comment
Stan Ball's 2 posts GB flag
K
Karen
10:37 PM

Got one tv with no freeview box that is still displaying BBC1 BBC2 ITV and Channel 5 but no Channel 4 - is this now gone forever, or is it there somewhere?

link to this comment
Karen's 1 post GB flag
Friday, 16 September 2011
Briantist
sentiment_very_satisfiedOwner

8:12 AM

Karen: You've got 12 days left before analogue television is "gone forever". Channel 4 is showing on the BBC TWO position until then.

link to this comment
Briantist's 38,915 posts GB flag
D
DavidX
9:45 AM

My TV retune worked perfectly, but I also have a set top box (Thomson DTI2300) which feeds an old non-Virgin Tivo. Post retune all BBC TV & radio has moved from channels 0001 upwards to channels 0109 upwards where Tivo cannot "see" them. All other channels are fine although the picture is a bit bleached. Channels 0001 upwards are now inhabited by clicks and pops which sound like very poor reception of the original BBC channels. How can I move the working BBC channels to their old location? Thomson no longer support STBs.

link to this comment
DavidX's 1 post GB flag
B
Barry
10:35 AM

Thanks Brian.
I was beginning to come to the same conclusion...
Now, I am wondering how much attenuation I need?

link to this comment
Barry's 8 posts GB flag
Briantist
sentiment_very_satisfiedOwner

11:17 AM

Barry: If you're sure it's not the box, then a variable attenuator is probably the best thing to get,
Variable Aerial Attenuator : Aerial Adaptors : Maplin
for example.

link to this comment
Briantist's 38,915 posts GB flag
Saturday, 17 September 2011
B
Barry
9:14 AM

Brian, thanks again.
I ordered variable attenuator, as recommended.
Of course, this will pull down all the channels, so C68 may be weak for a while... We will see!
As an aside, shops are full of amplifiers but no attenuators - yet!
Today I will try another TV on the same aerial.

link to this comment
Barry's 8 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.