menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

Expecting 4G interference? Tests now show that you have a one in 300 chance

Remember the scare stories in the papers? Millions of homes will have problems when 4G starts... Even the Ofcom figures suggested 760,000 homes would have problems. The 4G tests suggest the just 90,000 homes will need to fit a filter.

Remember the scare stories in the papers?  Millions of homes wi
published on UK Free TV

Looking back the the original posting, Ofcom moves to protect Freeview interference from 4G mobile, we can see the Ofcom suggested that:

Of the 16.3 million UK homes with a standard (unamplified, unshared) Freeview reception, 110,000 (0.67%) would be effected.

Of the 5.2 million homes using communal aerials systems, 550,000 (10.6%) will have problems.

Of the 5.6 million homes using amplified Freeview reception, 100,000 (1.8%) will experience problems.

Today, at800 have published the results of the tests in London, Brighton and Hove and York - at800 updates estimate of likely impact of 4G at 800 MHz on Freeview:

"Following tests conducted across the country, at800, the organisation responsible for protecting Freeview when 4G at 800 MHz is rolled out across the UK, has provided a new estimate of the likely scale of the impact. If national rollout reflects the results seen during its tests, at800 expects no more than 90,000 households, with Freeview as their primary TV service, to experience disruption caused by 4G at 800 MHz. Whatever the level of disruption, at800 is ready to restore Freeview to viewers.



at800 has now sent postcards to households in London and the surrounding areas in preparation for the activation of 4G at 800 MHz masts over the coming weeks and months. at800 is also sending postcards to other areas of the UK ahead of masts switching on. at800’s mailing does not mean that 4G services will be available to consumers. For information about the availability of 4G services, people should contact their mobile operators.

In London, in particular, Freeview received from the Crystal Palace transmitter is unlikely to be affected by mast activation because of the strong terrestrial television signal and its relatively large frequency separation from 4G at 800 MHz. However, at800 is sending postcards and running a publicity campaign to ensure anyone who does experience new disruption to their Freeview service knows how to get in touch."

So with 26.50 million TV households in the UK (see Monthly universe summary - BARB) 90,000 represents 0.340% of them - that's a ONE IN THREE HUNDRED chance.



It seems that you are most likely to need a filter if:

a) you are a long way from a high power Freeview transmitter; and

b) you are very close to a 4G mobile phone mast; and

c) you are using a booster.

That's good news for Freeview viewers.



If you have had a postcode from at800 - see Received a postcard from at800?



Help with TV/radio stations?
BBC Three Linear channel re-opens1
Will car radios have to be replaced?2
Will UKTV History and FTN eventually be available on fSfS or Freesat? They are 3
Could u please explain why there are no subtitles on most of your films terresti4
Can I pay as you go for British Europsort on my digital tv without subscribing?5
In this section
Ofcom announces 700 MHz clearance schedule 2017-201
When will I get a new Freeview aerial because of even more mobile broadband? 2
Do not forget that 4G starting soon in 20 cities and towns really soon3
Using UHF channels C61 to C69? Time to retune4
Two final Freeview retunes in Scotland on 24 and 31 July 20135
800MHz band cleared by Digital UK - ready for nationwide 4G use6

Comments
Wednesday, 8 April 2015
M
MikeB
sentiment_very_satisfiedPlatinum

8:42 PM

sue Hickerson: What transmitter are you tuned to? Fortunately, you've included your postcode, and as you can see, you should be fine for Sutton Coldfield, but less good for others. If you are tuned in somewhere else, then you will get poor recption, even with a booster. Of course, if your tuned into the very local transmitter, its so close (and with a booster) that your TV might find the signal too strong.

link to this comment
MikeB's 2,579 posts GB flag
J
jb38
sentiment_very_satisfiedPlatinum

9:44 PM

sue Hickerson : Although the Sandy (Anglia) transmitter is listed in the "Planned Engineering Works" page under the heading of "Possible weak Signal", this may not necessarily be the cause of your problem, as a number of Northamptonshire areas are notorious for suffering from erratic reception at certain times of the year, basically due to the signal path from both stations receivable in your location, namely Sandy (mostly used in your area) and Sutton Coldfield, both suffering from line-of-sight obstructions, the terrain indicator showing multiple obstructions from the latter mentioned.

Before making any attempts to improve the situation, I would try and make an enquiry with another household in your immediate vicinity to ascertain if they are also suffering from similar reception problems, because if they are, then the problem is out with your control.

That said is based on you using the Sandy transmitter for reception and not the Dallington Park Freeview "light" relay.

link to this comment
jb38's 7,179 posts GB flag
Monday, 8 May 2017
R
Rak
10:36 PM
Northwich

Getting 'No Signal' message on two Panasonic HD TVs on some HD channels.
Have 48 element Labgear aerial in loft (4th storey) pointed towards north (Winter Hill), with Antiference amplifier in loft.
Checking DVB signal condition on both TVs seeing;
Signal strength 10 on all channels,
Signal quality 10 on CH31, 37, 49, 50, 58 & 59,
Very variable signal quality on CH55 & 56
Postcode: CW8 1GF

link to this comment
Rak's 2 posts GB flag
Rak's: mapR's Freeview map terrainR's terrain plot wavesR's frequency data R's Freeview Detailed Coverage
M
MikeB
sentiment_very_satisfiedPlatinum

11:07 PM

Rak: Could start with having 10 on signal strength - thats far too high, and possible the source of 'no signal'

link to this comment
MikeB's 2,579 posts GB flag
R
Rak
11:21 PM

MikeB: OK Thanks Mike.
The No Signal only occurs on CH55 & 56 when signal quality falls to 0 and a bit error is displayed.
When signal quality is 4+ picture is OK.
Should I try reducing the Gain on the amplifier to reduce signal strength?

link to this comment
Rak's 2 posts GB flag
Tuesday, 9 May 2017
M
MikeB
sentiment_very_satisfiedPlatinum

10:56 AM

Rak: The tuner will react to a very strong signal in much the same way as too little, and yes, you need to turn down the gain - its debatable whether you might need the amp at all. See 'too much of a good thing' on this website.

link to this comment
MikeB's 2,579 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.







Privacy policy: UK Free Privacy policy.