Upgrading from Sky to Freesat

Brian Butterworth published on UK Free TV 8th May 2008 at 14:31

If you have an existing Sky or fSfS (Freesat from Sky) installation and want to go to upgrade to Freesat, it is a simple process.

First, buy the Freesat box from a Argos, Curry.digital, Comet, John Lewes or your local independent shop:



In the box you will find the Freesat box:



Also included will be a remote control, and this model also comes with a SCART cable, a HDMI cable and a stereo-with-composite cable. Unpack the ones you need:



You old Sky box looks like this:



Unplug the mains first from the Sky box, then pull out the SCART (or SCARTs) and then unscrew the connection to the satellite dish.



Remove the Sky box and fit the Freesat box. Reconnect the satellite cable (take care as to not damage the connection) and then the SCART and finally connect the mains power:



The box will look like this:



The box also contains the manual, which has full installation instructions. Finally fit the batteries into the remote control.



The TV screen first displays the box's logo



The first set-up screen allows you to select the TV type, widescreen mode and resolution:



Next the box checks for the satellite signal:



Then there is a check for updated software:



Then you enter your postcode and the box checks it:



The next step is a scan for channels. This takes about 30 seconds:



And that's it. You can now view channels, like 108 for BBC HD:



Or press the GUIDE button for the EPG:



(Apologies for the photos not being of the top quality)