I have now lost all signal can you tell me what the problem might be?
Brian Butterworth published on UK Free TV The problem could be one of:
- the aerial has been moved or damaged;
- the cables or connectors that connect the digibox to the aerial are damaged;
- the digibox has broken.
If you have a "spare" digibox you use this to test the aerial connection. Can you still watch analogue TV OK?
All questions
In this section
Thursday, 3 December 2015
D
Dan6:53 AM
Well I suspect something was wrong with the Pvr. I unplugged it completely and removed all aerial cables for at least 10 minutes and the set top box then worked fine. I plugged the Pvr back in and it then worked. I was reading the analog interference article that made me think to do this. I hope I'm posting in the right place as I can't find my original comment, Just wanted to give you an update as I know how annoying it is giving advice and not getting a response
Cheers, dan
| link to this comment |
Tuesday, 8 December 2015
S
Steve Leah7:57 PM
Hi
I have a Sense 42" Model No 51-42 which has been working off our Sky box and BT when I switched. I have now moved it in to another room without a sky box or BT so it is plugged into the normal aerial socket( which works as we had another television in there until yesterday working fine. I cannot find any channels when going through auto search it comes up with no signal on every channel I change to.
Any ideas what to do please.
| link to this comment |
J
js8:35 PM
Steve Leah: From google: "The Sense 51-42 LCD TV has ... built in DVB Freeview and analogue TV tuner."
You need to select Digital TV before scanning as Analogue TV is no longer transmitted.
A factory-reset or 'First Time Installation' may be appropriate.
| link to this comment |
Thursday, 17 December 2015
J
jayne2:20 PM
My tv when i swich it on says scan on a blk screan and a bar moving up the tv saying 40%. 50%til it reach 100% then it goes bac to beg why
| link to this comment |
J
jb386:51 PM
jayne: That said suggests that your TV carried out an auto-scan as soon as you switched it on, the percentage figures referred to indicating the progress of the tuner carrying out a rescan, the fact of it reverting back to the beginning again meaning that the tuner hasn't stored any channels. Of course that is "if" nothing is being received?, if not check your aerial connections, if though they are, then the auto-scan was most likely for purpose of channel updating.
Further advice as / if required.
| link to this comment |
Friday, 18 December 2015
P
Philip6:10 PM
Have roof ariel running into a splitter then to 2 TV's in different rooms
One ariel works fine but other can't pick anything up
Have switched TV's and both work on the one coax
Have switched coax on splitters to no avail
Have replaced coax and connectors still no picture however other TV has great picture
Post code is ph73jt
| link to this comment |
Saturday, 19 December 2015
MikeP
3:58 PM
3:58 PM
Philip:
From what your state it seems as if the splitter might be the cause of the problem. Try a different one and check all the cables and connections.
| link to this comment |
Monday, 28 December 2015
V
Val1:35 PM
new sharp tv plugged into outdoor aerial thats works for old tv that was already there and working but says 'no signal'. Have tried selecting all choices for source and none of them pick up signal to let us tune tv in
| link to this comment |
MikeP
3:36 PM
3:36 PM
Val:
It is likely to be saying no signal because it has not yet been tuned to your loacl services. Set it to find Freeview Ddigital TV signals and then run the automatic tuning option.
| link to this comment |
Tuesday, 29 December 2015
V
Val10:49 AM
MikeP:
I've tried that.When i select Freeview it still says no signal and i cant get to the part where i can run automatic tuning :(
| link to this comment |
Select more comments
Your comment please