menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

All posts by ADRIAN

Below are all of ADRIAN's postings, with the most recent are at the bottom of the page.

Channel 4
Friday 10 February 2012 8:35PM
Crawley

Hello, one month ago I have installed an I-Can Easy HD Receiver with my existing roof aerial which I believe points to Crystal Palace. My post code is RH10 3TN. All scanned well, all channels fine. Today I've noticed NO SIGNAL for Channel 4 and ITV1, all others OK. Re-plugged, reset, etc..still no signal. I dont believe it's the box as al other channels are OK. What else can it be then ?

link to this comment
GB
Channel 4
Saturday 11 February 2012 9:38PM
Crawley

I have a fundamental question about Channel 4 and ITV : are these digital or analogue or both ??? My TV with Freeview does not list them in the All TV list but in a separate list called Analogue. Here I can see them in what I suspect it is analogue. My I-Can digital receiver lists them in All TV and sometime I see them and sometime I don't as per my previous post here. I suspect that what I see in the I-Can is digital channels ??? Two Freeview boxes ( my TV and the I-Can) both connected to same aerial and I see different things ??? Is this how it's going to be from April 2012 ??

link to this comment
GB
Channel 4
Sunday 12 February 2012 6:07PM

ADRIAN: Many thanks to both Dave and jb38 for taking the time to explain this to me.Really grateful for your help. I now plan to do nothing until the switchover, I'll deal with any problems after that. For reference the I-Can website is at : I-CAN from where the manual can be viewed/downloaded, which I did when I bought the box. (RH103TN)

link to this comment
GB
Channel 4
Thursday 16 February 2012 8:30PM
Crawley

ADRIAN: Dave, I now know why I lost my channels on the I-Can. When installing it I removed one of the 2 signal amplifiers/splitters I have ( connected in series). The signal was so low the I-Can did not see anything on channel 22 so gradually lost all channels. I have re-installed the second amplifier and re-scanned and now I've got all channels showing OK.

link to this comment
GB