All posts by Briantist
Below are all of Briantist's postings, with the most recent are at the bottom of the page.
stewart curtis: By the sounds of things, it sounds like you have too much signal and you are in an excellent reception area.
If the splitter has an amplifier you should try removing it and seeing if you get good reception bypassing it. If you do, use a passive splitter (y-connectors) rather than a booster.
| link to this comment |
Colin: Please see Upgrading from Sky+HD to Freesat+HD | ukfree.tv - independent free digital TV advice .
| link to this comment |
james powne: Yes, or Upgrading from Sky+HD to Freesat+HD | ukfree.tv - independent free digital TV advice .
| link to this comment |
paul limb: Do you mean Freesat from Sky? You might need to have your dish realigned to the satellites to have it work in all conditions.
| link to this comment |
TVTUNER: Yes, as above
"ArqA restricted to 20kW from DSO 2 'until further notice'. ArqB starts up on C41 (final channel is C47) and restricted to 20kW. (Ofcom say C41 is allocated to SDN at this transmitter and there's no note. DUK shows final channels at DSO 2 but does show two 'COM late power up' events.)"
PSB multiplexes broadcast on three old analogue frequencies.
| link to this comment |
Joe Pavitt: I hope you like PDF files... Ofcom | Digital Switchover Transmitter Details .
| link to this comment |
Peter K: I can see both of them - All posts by Peter K | ukfree.tv - independent free digital TV advice .
| link to this comment |
Helen Payne: You have not provided a postcode, so it is hard to be specific. Can you see Freeview reception has changed? | ukfree.tv - independent free digital TV advice for general advice?
| link to this comment |
carl: The usual reason for this would be that you have enabled one of the "Dolby" modes, but do not have a suitable amplifier. If you can see "Dolby" in the TV's "Sound settings" menu, turn it back to "stereo".
| link to this comment |
Monday 15 August 2011 8:50AM
Christopher Hammond: Just ITV1 and not all the channels on multiplex 2?