All posts by Briantist
Below are all of Briantist's postings, with the most recent are at the bottom of the page.
Sam: I would just hang on for two weeks and everything will be OK. Nothing happened to Multiplex 2 at the first stage of switchover, you may actually have too much signal from the single high power service - see Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice .
| link to this comment |
James: If you have already tried My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice then can you please see Single frequency interference | ukfree.tv - independent free digital TV advice .
| link to this comment |
carla: Hard to be specific without a full postcode, can you please see Single frequency interference | ukfree.tv - independent free digital TV advice ?
| link to this comment |
Angela: Hard to be specific withotu a full postcode, but generally speaking first try My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice and then see Single frequency interference | ukfree.tv - independent free digital TV advice .
Nothing actually happened at Belmont this week (it was the Oxford transmitter that had changes).
Belmont has been fully digital since Wednesday 17th August 2011.
| link to this comment |
claire: You don't need a new aerial, but you will need to retune to get the BBC channels back. Please do My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice to your set.
| link to this comment |
chrism42:
14th September 2011 - ArqB moves from C67 to C48 at 20kW and ArqA moves from C40 to C67 (vacated by ArqB).
23rd November 2011 - ArqA move from C67 to C52, changes to 8k mode.
9th May 2012 - SDN to 8k moves from C31 to C51
Wednesday 27th June 2012 or thereafter - SDN/ArqA/ArqB - output levels go up to 170kW
| link to this comment |
Skittish Kitty: Please can you see Single frequency interference | ukfree.tv - independent free digital TV advice ?
| link to this comment |
Mark Lunnon: 80% is just fine - see Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice .
| link to this comment |
Thursday 15 September 2011 8:41AM
Niven: You have not provided a full postcode, so it hard to be specific, but yes, it does sound like you have an overload.
As pointed out in the above article, "75%" is a suitable signal strength, it is the signal quality that matters.