menuMENU    UK Free TV logo Help!



Click to see updates

My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound o

My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong

My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+
published on UK Free TV

To deal with the problem you must clear the channel list completely and then rescan - if your box has it in the menus, please the 'installation menu' to do an initial scan or a reset to factory settings or First Time Installation. You MUST delete the entire existing list of channels. On most boxes this technique can be also be used:

Try this:

1) unplug your Freeview box (or idTV) from the mains;

2) unplug the aerial from the Freeview box by disconnecting the cable from the 'RF in' socket;

3) wait 30 seconds;

4) plug Freeview box (or idTV) mains back in;

5) do a complete scan for channels - it will fail without the aerial. (This may be in the installation or initialization menu, and is distinct from any 'add channels option'). Once this is done your channel line up should be empty;

6) reinsert aerial by reconnecting to the 'RF in' connection;

7) do a complete scan for channels again.

The Freeview channel line-up provided by six "multiplexes" - each of which carry five or more TV channels, radio channels, text services and EPG data. In this diagram each ROW represents a multiplex. If you are still missing a whole multiplex (ie everything on the row) you may need to replace your aerial with a wideband type, purchase a larger aerial or you may have interference from a VCR, games console, Sky Digibox or similar.

All questions
BBC Three Linear channel re-opens1
Removing all barriers to communication between diverse cultures2
How do I get a test card with Freeview3
What can I do when my Sky Digibox says 'No Signal' or 'Technical fau4
Can I receive UK TV in Ghana?5
In this section
I have now lost all signal can you tell me what the problem might be?1
I have a Durabrand cg5660-m and I need the lock key code!2
What is the Inversion Effect and why does it effect my Freeview TV reception? 3
My ITV/C4 Freeview channels have disappeared - what can I do? Is it my SCART ca4
My high gain aerial can't get all the Freeview channels I expected5
What are the aerial types about? Are they high-gain?6

Saturday, 10 February 2018
peter rance
3:39 PM

peter rance: So now i have 40 43 and 46 are these the hd channels as humax said for hd channels i need to change the dvb to dbt2

and the other channles i take it are normal 45 39 54 32 and 34 (27 being low signal) Thank you again for all your help peter

link to this comment
peter rance's 15 posts GB flag

4:14 PM

peter rance: PSB3 on UHF 40 and COM7/8 on UHF 32/34 are DVB-T2 muxes carrying both HD and SD channels, the other muxes are all DVB-T carrying SD channels only.

link to this comment
StevensOnln1's 3,639 posts GB flag
peter rance
4:21 PM

peter rance: thank you Steve, your help is most appreciated, thank you :)

link to this comment
peter rance's 15 posts GB flag
Monday, 12 February 2018
John Langley
7:41 PM

Hi. Really need some help! I have just done a complete channel re scan on the freeview TVs in our house to update them with some of the "moved" and/or new stations. All the TVs except one are fine. One a relatively new but basic TV has numerous stations now "missing". It is one of two fed from a signal amplifier and was perfect before the re scan. The other TV connected (after the rescan) is fine with all the new/moved stations. I have swapped the arial feed over and re done the scan but numerous stations are still missing and the other TV is fine on the other lead. I have tried again with a new lead with no improvement. I then switched the TV off, disconnected the arial, rescanned to remove stations as suggested, then rescanned again with arial connected. No improvement at all! Any practical ideas gratefully accepted!!!! Thanks in advance and regards John

link to this comment
John Langley's 3 posts GB flag

8:18 PM

John Langley: OK - put the other (fine) TV onto that outlet and check signal strength, plus what transmitter its on.

Then swap it over for the other one - if the signal strength is low on both, then its the outlet or the lead. If the transmitter is different, then you need to tune it in to the correct one.

Remember that different TV's have different tuners, and they can be slightly more or less sensitive than each other - a dodgy aerial can make enough difference to lose a mux.

link to this comment
MikeB's 2,579 posts GB flag
Wednesday, 14 February 2018
Sharon Downie
12:53 PM

I cannot get any HD Channels all of a sudden and most other Channels are pixcalating.The only Channels that are watchable are itv channel 4 and 5 not HD we had an Engineer in who put a filter on the Aerial this seemed to work for a couple of months but its back to as bad as ever any ideas what we can try

link to this comment
Sharon Downie's 1 post US flag
Thursday, 15 February 2018

10:47 AM

Sharon Downie:

Please give a full post code so that we can determine the reception conditions at your location.

Pixilation can be caused by either too little signal or too much. Check all the cables and connection behind your TV set first to make sure there are no poor or bad connections. Then check what the signal strengths are, they need to be between 60% and 85% - no higher and no lower.

link to this comment
MikeP's 3,056 posts GB flag
Friday, 16 February 2018
J. Watson
10:52 PM

Have lost all BBC and ITV channels plus some free view channels, some say low signal, no signal or pixelate. This only seenms to happen at night. Had aerial engineer out and was told signal was fine.any info much appreciated.During day all channels are OK.

link to this comment
J. Watson's 1 post GB flag

11:13 PM

J. Watson: If the problem is only happening at certain times then it's quite likely that you're suffering with electrical interference from something operating on a timer switch, probably something with an electric motor such as a central heating pump.

link to this comment
StevensOnln1's 3,639 posts GB flag
Tuesday, 20 February 2018
Bill Kocher

8:16 AM

Following engineering work on the Brighton (Central) transmitter, the sound on BBC1 is out of sync with the picture. SD is fine, but I don't want to watch programs in 'blur-o-vision' as I refer to SD. Anyone any idea if this will be sorted or is it something I have to sort? Rescan channels etc.

link to this comment
Bill Kocher's 47 posts GB flag
Select more comments

Your comment please
Please post a question, answer or commentUK Free TV is here to help people. If you are rude or disrespectful all of your posts will be deleted and you will be banned.

Privacy policy: UK Free Privacy policy.