How do I change the RF output channel on a Sky Digibox?
Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]
Then press [4] to go to the RF output menu.
You can now change the value so that it does not clash with an analogue TV channel or a Freeview multiplex.
HD and "new EPG" boxes
If you have a HD box, press [SERVICES] button and then press [0] [0] [1] then [SELECT]. Nothing is shown on the TV screen until you press the Select button.Then use the [RIGHT] arrow button on the remote until this screen is shown, and press SELECT to change the values:
All questions
In this section
Saturday, 7 July 2012
J
JAMES8:46 AM
Market Drayton
Thanks JB38, yes it is just when on sky and not all the time. For example if i change the RF channel or just switch the sky box on and off it may be ok for a few hours but then just drops out again. The picture is fine. I have tried taking the arial out the back but again seems to drop out. I have tried the different spare RF channels as recommended by post code but still no permanent success. Any other recommendations would be appreciated. Thanks
link to this comment |
JAMES's: mapJ's Freeview map terrainJ's terrain plot wavesJ's frequency data J's Freeview Detailed Coverage
Monday, 9 July 2012
M
malcolm7:30 PM
i have a second tv in my summer house ( 110 feet from sky+hd boxin my back room ) i ran a coaxil cable down to the summer house got the Rf settings right and eventually got a good picture for both Sky and freeview and even got the tv link to work !! i then went to buy some conduit , fed the cable through ( with some difficulty ) and reconnected up and now i have a "snowy " picture and the tv link wont work , WHAT HAS HAPPENED ???? .There are no sharp bends in the conduit .HELP
link to this comment |
malcolm: Your biggest issue will be finding some summer to enjoy your summer house.
link to this comment |
J
jb388:17 PM
malcolm: If when you say that the TV link doesnt work are you meaning the magic eye? because if its not lighting up then there has to be a broken connection, as the LED in the eye uses pure DC voltage from the Sky boxes RF2.
link to this comment |
J
jb388:21 PM
malcolm: Or of course a short circuit inside one of the connector plugs, as both of these faults will have exactly the same outcome.
link to this comment |
M
malcolm9:29 PM
thank you JB38 , my head is done in will look at it over the next few days .
i appreciate your help .
thank you
Malcolm
link to this comment |
J
jb389:43 PM
malcolm: OK, and will keep a look out for an update from you.
link to this comment |
Tuesday, 10 July 2012
M
malcolm6:55 PM
JB 38 , i now have a pictue but no sound .Any ideas ??
link to this comment |
M
malcolm8:18 PM
i have successfully linked my 2nd tv to my sky + hd box ,have a good picture BUT NO SOUND ..... can anyone help please ?
link to this comment |
Select more comments
Your comment please