Connecting it all up
Why are there so many sorts of connecting cables? Find out with this quick guide.
The connectors on each cable are called plugs (and are also called male) and they will usually fit only into one sort of socket (or female connector).
Most cables you will come across are male to male. Occasionally you will find leads with a socket on one end and a plug on the other, and these are called "extension cables".
SCART
The SCART cable is used to connect a set-top box to a television set, or to a video recorder. This can only be a short cable. The SCART cable carries all of these types of signal:
- analogue stereo sound
- a single RGB television picture
- a single composite video picture
- a single S-Video video picture
- widescreen picture signal
As stereo sound, RGB picture and widescreen signal is the best possible combination for digital television viewing, it is vital to use a SCART lead between any set-top box and the main television.
The composite video picture with stereo sound is the best combination for a VHS video recorder. If your set-top box has two SCART sockets, it is likely that the one marked TV will carry RGB picture information and the other will not.
If your television has more than one SCART input, you may need to choose a special one (marked RGB) if you want to use RGB from the SCART cable.
On most set-top boxes it is possible to turn the RGB output on and off. This can be used to test the RGB input function on the television ? the picture quality appears blurred when it is disabled.
If have a DVD player, rather than a VHS recorder, you can attach this to the set-top boxes second SCART connector. The signal from the set-top box will normally be overridden by the DVD player when it is on, usually in high-quality RGB.
Some very cheap SCART cables do not have all the pins connected. They may not provide RGB and widescreen picture signals. SCART cables are normally no more than three metres in length.
UHF lead
The UHF lead is a lead that you would traditionally associate with television signals. They can carry:
- up to 45 (but normally only five) analogue television channels
- a single picture from a set-top box
- around 50 analogue cable TV channels
- mono sound
- NICAM stereo sound
- Teletext services (for example, Ceefax)
You can't avoid these cables if you are going to use Freeview, as these cables are the only ones that you can use to distribute Freeview signals around the house.
Where you have an integrated digital television (an idTV) you just need to get the signal from the aerial to the television with one of these cables.
If you are using a Freeview set-top box, you will need to get the signal from the aerial to the set-top box using this aerial lead, but for best results connect the TV to the box with a SCART cable.
You can also use a UHF lead to connect a set-top box to a television somewhere in the house. Your set-top box will require a RF (radio frequency) modulator. Note that "RF passthough" is another way of saying there is no modulator. You will be able to "tune" the second television into the picture showing on the set-top box.
Some boxes (all Sky boxes) have the ability to connect a remote control receiver to the second TV end of the interconnecting cable, so you can change channels.
The set-top boxes, whilst providing a reasonable quality picture to the second TV, will always provide only mono sound via a UHF lead.
The step-change in picture quality obtained by switching to RGB on a SCART is far greater than any obtained though spending any more on a gold-plated SCART cable.
Satellite or cable TV cable
These cables are usually very stiff, and have a very basic screw connector on the end. Usually they will provide an unbroken link to the satellite dish. At the dish end they plug into the device on the end of the arm, the LNB.
Don't try to disconnect these cables when the set-top box is on. Usually there is a small voltage that will cause dangerous sparks.
If the cable connects to a satellite dish, there is not much you can do with the cable. Each receiver in the set-top box needs it's own wire to the LNB. With a personal video recorder (such as Sky+), or a multi-room installations there are two cables to the four-output LNB on the dish. If you want more rooms, each will require it's own cable.
If the cable is providing cable TV, then it is possible to use inexpensive "Y connectors" to link the incoming signal to various set-top boxes, cable modems, or - via an adaptor - directly to the back of a TV.
Composite video cable
This is the most simple and basic video connection you can get. It carries:
- a single picture from a set-top box
The picture will be in colour, and of comparable quality to a analogue broadcast station. However, there is no sound. For that reason this cable is often found joined to a stereo audio cable.
These signals are quite robust and can be carried for many metres. Often modern television sets have a single yellow photo input on their front input panel.
You also use an identical cable to carry digital stereo (SPDIF) sound.
Stereo audio cable
These cables carry the left and right channels of sound on two joined cables. They are usually required when a SCART cable is not being used, as the SCART cable already carries stereo sound.
If you are connecting your set-top box to an external stereo system, a separate stereo audio is used.
There is no real practicable limit to the length of these cables, but excessive length will degrade the quality of the signal.
S-video cable
The S-video standard is not well supported by most UK digital TV boxes, and very few have a S-video socket. If you need one for a particular analogue camcorder, use it, but avoid S-video with digital television. If you are using what appears to be a monochrome picture from a SCART lead, it will certainly by an incomplete S-Video signal and you should change to the RGB input.
VGA cable
This is the cable you will use to connect a computer to a old style monitor, and some modern LCD screen too. Most modern LCD TVs will have a VGA input too.
If you want to connect a set-top box to a LCD monitor, you can buy a conversion box from around 60. However this will not result in a better picture than using an existing SCART socket if there is one.
The only way to get higher than normal television resolution is to use a VGA in conjunction with a personal computer or modern games console.
DVI cable
If you want to get the very best out of a television or monitor use a digital video interconnect (DVI) cable.
This will be the only way for most televisions and monitors to receive high-definition pictures from a computer, and some set-top boxes.
If you can use either a VGA cable or a DVI cable, choose the DVI option.
HDMI cable
If you want to get the very best out of a television use a HDMI cable.
This will be the only way for most televisions to receive high-definition pictures from set-top boxes.
Help with Television sets?
Thursday, 8 September 2011
Michael.: OK, the phone line is of no use. If you want to move the box you will need to have the incoming satellite feeds rerouted and you have made no mention of this.
link to this comment |
C
Colin Brown1:34 PM
I have the following set-up:
TV with 2xHDMI, AV1 and AV2 Scarts
and
Cable V+HD Box with 1xHDMI, VCR and TV Scarts
and
DVD Recorder with 1xHDMI, Line 1(Decoder) and Line 3(TV) Scarts.
Can somebody please help me to connect this lot up, so that I can make full use of all of the possibilities..........I really don't have a clue and the Rugby World Cup is about to start!!!
Many thanks,
Colin
link to this comment |
KB Aerials Sheffield
3:35 PM
3:35 PM
cable hdmi from cable box to tv
again HDMI from DVD recorder to tv
If you want to record the cable box onto the DVD then a scart lead is also needed from the VCR socket of the cable box to Scart 1 of the DVD
Shimples
link to this comment |
C
Colin Brown5:11 PM
Brilliant.................I have been messing about with this for absolute ages!!!
Thank you very much indeed
Colin
link to this comment |
KB Aerials Sheffield
7:14 PM
7:14 PM
No problems - stick us a quid in the imaginary tip box!
link to this comment |
Friday, 9 September 2011
D
dawn12:52 AM
Filey
since our digital switchover all videos and dvd's will only play in black & white on the tv with freeview built in (panasonic) - how can see them in colour? the other older tv with built in video and now digibox plays the videos in colour the same as it did before.What do we need to on the panasonic to put it right.
link to this comment |
dawn's: mapD's Freeview map terrainD's terrain plot wavesD's frequency data D's Freeview Detailed Coverage
dawn: I would disconnect and reconnect the SCART cables connected to the set, I can't see this having anything to do with digital switchover.
link to this comment |
Saturday, 10 September 2011
A
Alan3:55 PM
Hello - On our main tv we have virgin cable.
However, we would like Digital/Freeview in another downstairs room but as we do not have an outdoor aerial at the moment this is not possible.
Is it difficult to put in your own aerial?
We are in the Bromley area and can see one of the Crystal Palace masts.
Help would be much appreciated.
link to this comment |
Sunday, 11 September 2011
kB Aerials Sheffield
9:17 AM
9:17 AM
Alan - if your a bit of a diy'er that doesnt mind heights then its not so difficult - have you thought of trying a loft aerial?
But if you get shakey when you see a ladder _ PLEASE PLEASE PLEASE leave it to someone who does it for a living - we carry thousands of pounds worth of equipment to do the job right
I know aerials arnt expensive to physically buy --its the "making them work" bit that you pay us riggers for
Keith
link to this comment |
P
Paul Reynolds10:29 AM
I have just bought a Panasonic Plasma Full HD TV & want to connect this to a SKY+ box.
Can you please explain simply how I set this up - (I'm rubbish at this!)?
Can you also please advise me if I need to buy a HDMI cable to connect the TV to The SKY+ box?
Thanks!!
Paul
link to this comment |
Select more comments
Your comment please