What can I do when my Sky Digibox says 'No Signal' or 'Technical fau
How to Reset a Sky Digibox when 'No Signal' appears.
Reset method 1 - Delete and Rescan
- Turn the power off at the mains socket. Either do this by pulling the plug from the socket, or using a power switch if there is one.
- Remove the viewing card from the machine. Using a dry cloth or kitchen roll, clean the gold connector on the reverse of the card. Do not use any cleaning products.
- Check cables and connectors are in good order.
- Wait for at least 30 seconds.
- With the card still out of the machine, plug the Digibox back into the mains.
- Ignore all the messages, and wait for around a minute.
- Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
- Insert viewing card, wait a few seconds.
- Check 104 for Channel 4 and 105 for five.
Reset Method 2 - Reset the LNB
If the above method does not work, the LNB may have a fault.- Press the [SERVICES] button and then press [4] [0] [1] then [SELECT]
On Sky HD, press the [SERVICES] button and then press [0] [0] [1] then [SELECT]
Press the buttons in the sequence above exactly - do not atttempt to use [UP] or [DOWN]. Note that when you press the second 0 and 1 nothing happens on the screen until you press the final [SELECT]. This is a "hidden menu". - Then press [1] to go to the RF output menu.
- Press [DOWN] three times to highlight the line 22Khz Command and then press [RIGHT] to change the value to [OFF].
- Press [DOWN] and [SELECT] to select Save New Settings.
- Press [SKY].
- Again press [SERVICES], [4], [0], [1], [SELECT]; then [1] again for the LNB Menu. (SERVICES 0 0 1 SELECT for Sky HD).
- Now press the [RED] button (reset all settings), then [DOWN] until you can select Save New Settings again.
- Press [SKY].
Reset Method 3 - Upgrade the system software
If there are still problems:- Turn the Digibox off at the mains again and remove the viewing card.
- Whilst holding down the BACKUP key on the Digibox - NOT ON THE REMOTE - turn the mains power on.
- Keep hold of BACKUP until the screen displays a "UPGRADING SYSTEM SOFTWARE" message ââ¬â this will be white text on a black screen. On some boxes this can appear as a half screen.
- Wait 10 to 20 minutes for the software to download and install. The box will restart when the process is complete.
- Ignore all the messages, and wait for around a minute.
- Try 101 for BBC One, 102 for BBC Two and 103 for ITV-1.
- Insert viewing card, wait a few seconds.
- Check 104 for Channel 4 and 105 for five.
All questions
In this section
Monday, 26 September 2011
KB Aerials Sheffield
10:30 PM
10:30 PM
Jan
as long as its not your dish at fault you can get a standard definition FREESAT box from argos for £30 that would take place of your sky box
link to this comment |
Wednesday, 28 September 2011
N
neil1:48 PM
i have an old sky dish up that i was receiving freesat from up until about 12 months ago
it would occasionally make a high pitched sound them stop receiving signal
eventually it stopped altogether
i tried another box albeit an older one aswell but still no signal
any ideas?
link to this comment |
KB Aerials Sheffield
7:26 PM
7:26 PM
Neil - sat dish might need re aligning
haven't a clue what the high pitch sound was unless it was the power supply dying
link to this comment |
M
mark8:37 PM
Hi I have an old sky dish and up until about 8 months it worked fine with two sky boxes attached.I am trying to use the dish for freesat but am getting no signal what so ever from the dish,i have purchased a new hd lnb and also a signal tester,i have moved the dish in all sorts of positions and still nothing have you any ideas.Thanks
link to this comment |
KB Aerials Sheffield
9:54 PM
9:54 PM
Mark - I think you have exhausted your DIY capabilities im afraid - without the correct equipment lining a dish up can be done but is not the easiest thing todo - will give you an example
a friend of mine owns a plot of land in france and has tried for over a year in varying weather and sheer frustration moving the dish millimetres at a time with no success
I turn up for a holiday with my £300 Horizon hdsm meter and have it lined up within 2 mins
Bite the bullet and get a local professional in to line the dish up for you -- one thing I will ask is --- Is there anything in the way - has a tree grown that little bit more and is now blocking the signal ?
Expect to pay a local rigger £45- £65 to line a dish up that is on a standard wall - expect to pay more if the dish is on a roof/chimney
Keith KB Aerials Sheffield 07946481125
link to this comment |
Thursday, 29 September 2011
B
ben2:32 PM
hey got a wierd problem on my sky box the lock indicator is not locked but i have 80% signal and 40% quality but no pictures on any channel? any solutions
link to this comment |
ben: This usually means the dish is aligned to a satellite, just not the right one.
link to this comment |
Friday, 30 September 2011
kb Aerials Sheffield
5:32 PM
5:32 PM
Ben there are umpteen satellites in whats called the Clarke Belt
your satellite dish can point to any one of these satellites some are stronger than others in britain - but your sky dish can pick up a signal from popular satellites like SKY 28.2 ° East or 19.2°east - the angle of the dish isn't far so if you have tried to re align your dish using the signal strength meter it is not un common to line up on the wrong satellite !
TRy moving the dishto the left a bit till the signal strength goes up again - hopefully you will get the lock message next time
or - get someone out to line it up for you
Keith KB Aerials Sheffield 07946481125
link to this comment |
E
Evad7:09 PM
hi can anyone help with my problem, i have brought my sky hd box to spain murcia region,and simply swapped it for my near perfect working sky+ box, re set it to the same as the sky+ 12207 etc search for channels and after a while no signal found appears.So refit the sky+ box and still working well and shows a good signal only thing that does not work is information when in sky tv guide which has never worked, I have the original card in each box, but no longer pay any subscription, just get lots of free channels but not chan 4 or chan 5 tho do get 4+1 ,does anyone have any suggestions to get the hd box to work,I fitted all up myself as i have done many times,and did ask at a local tv shop if hd box worked here and was told of course, many thanks dave
link to this comment |
Saturday, 1 October 2011
J
Jim F5:28 PM
Evad: Try rebooting the SkyHD box. Switch off the power, and leave it for a few seconds. Then press and hold the "back up" botton on the box, and keep holding this down while you switch the mains power to the box on. Keep holding down the "back up" button until all four LEDs light on the front of the box (can take 15 seconds or so). At this stage, you can release the "back up" button - you should see a message on the screen saying Software Update - do not switch off - may take up to 10 minutes. Leave the box to complete this reboot. After it has finished (and a short delay) the box will typically show a "Sky HD please wait...." message on the screen. Leave it alone whilst this is on. After it has disappeared, the box will go into standby - and then you should be able to power it up.
Occasionally this has to be done a couple of times.
link to this comment |
Select more comments
Your comment please