Feedback
Brian Butterworth published on UK Free TV For the last six years, I have answered many thousands of personal emails that you have sent to UK Free TV.
Sadly, I am unable to offer this personal service at the moment.
Until I can restore this service, please can you leave any questions you have on an appropriate page, where they will be answered as soon as possible, or below, if you can't figure out where to ask.
I look forward to your questions!
Help with TV/radio stations?
In this section
Monday, 31 October 2011
P
Pam1:40 PM
Hi I have just got Sky HD and now the TV with the Eye that worked in the bedroom ios saying no signal, It was working perfect before. I have tried to follow instructions off google about changing RF settings, I have tried from 60 to 68 not sure if I am doing it right. Please Help !!!
Thanks Pam
| link to this comment |
paul: I have just checked and Channel 5 is still showing as being on 10773 H 22000-5/6
| link to this comment |
J
Jack3:26 PM
With a Freesat HD + box, can I get any Documentary or History channels?
| link to this comment |
P
Pam4:43 PM
Hull
Hi Here is my postcode HU5 5BB just waiting for a reply :)
| link to this comment |
Pam's: mapP's Freeview map terrainP's terrain plot wavesP's frequency data P's Freeview Detailed Coverage
Jack: The list of channels you can get is here - All free-to-watch channels | ukfree.tv - independent free digital TV advice .
| link to this comment |
J
jb385:57 PM
Pam: "If" you have previously been using a Sky box and all you have done is upgraded to Sky+HD, then if you set the RF output channel to the same number as was used on the previous Sky box then nothing else need be altered, that is except to make sure that the RF2 output on the new Sky box is powered up, this done via the same menu you used to alter the RF channel number. (Ch62 to 68 being OK)
To access the menu press "Services" then "4 - 0 - 1 - Select" in a smooth operation, best done by looking at the remote control and NOT the screen, then select what's required on the options seen.
To access menu on latest Sky+HD boxes you may have to use "Services" then "0 - 0 - 1 - Select"
Remember that any alterations you make to the RF output channel must immediately be followed by re-scanning (in analogue) the TV in the other room, this to enable it to pick up the new channel being used on the Sky box.
| link to this comment |
P
Pam8:19 PM
ok will have a go at that tomorrow and let u know how i get on. Thanks again Pam
| link to this comment |
S
SteveG9:26 PM
Hi,
Can you confirm that my tv won't receive the free HD channels? Details below.
Digital Terrestrial Tuner (MPEG-2): YES (DVB-T)
Digital TV Cable Tuner (with supported operators): DVB-C
CI+ Ready (with supported operators): YES
High Definition TV Tuner (MPEG-4) - H.264 (with supported operators): YES
Can i receive anything extra with the MPEG-4?
Thanks.
| link to this comment |
G
gin10:27 PM
London
hi again, i get channels 1-5 at the moment
| link to this comment |
gin's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
Select more comments
Your comment please