menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

All posts by Dave Lindsay

Below are all of Dave Lindsay's postings, with the most recent are at the bottom of the page.


nick: Try manually tuning UHF channel 24 (for ITV/C4/C5 etc). This is the channel used by the Buxton relay.

link to this comment
GB flag
Feedback | Feedback
Tuesday 6 December 2011 5:47PM

John: I don't know about Freesat, but RT will be broadcast from Brougher Mountain,
Black Mountain and Carnmoney Hill at lower power than the other services. According to Digital UK, Divis will not carry these services.

See here for the recently published Installer Newsletter from Digital UK on the subject of the switchover in Northern Ireland:

http://www.digitaluk.co.u….pdf

Quote from that leaflet:

The Good Friday Agreement and February 2010 Memorandum of Understanding between the UK and Ireland Governments included provision for ensuring that TG4 , RT 1 and RT 2 standard definition services are made available to much of Northern Ireland . In part this will be achieved via a seventh, low-power, TV multiplex (mux), operating from the Brougher Mountain, Black Mountain and Carnmoney Hill transmitters and using the DVB-T2 standard to maximise coverage. While all three services will be standard definition only, a Freeview HD receiver will be required to watch them. The timing for the launch of these services is still to be confirmed.

link to this comment
GB flag
C45 (666.0MHz) after switchover
Tuesday 6 December 2011 8:23PM

graham k: We have had a number of reports of issues with this multiplex from Sutton Coldfield. A few hours ago some people posted to say that the fault with the transmitter has been fixed:

Freeview on Sutton Coldfield TV transmitter | ukfree.tv - independent free digital TV advice

link to this comment
GB flag

John: The transmitter isn't changing channels; it's your receiver that is retuning itself!

The BBC is on UHF channel 60 from Brierley Hill and ITV is on 57. Is this what you tuned it to?

link to this comment
GB flag

Hollie: If you have a signal booster, remove it.

What sort of reception did you have before switchover?

Can you not get any TVs in your house to work?

link to this comment
GB flag

Roy: Are there any trees that could be in the way?

At 94degrees, could it be other buildings on the lane that are in the way?

link to this comment
GB flag

David F: If it is reflected signal (and it is probably difficult to say without professional test gear), then it might be possible to re-site the aerial so that there is something blocking the reflection. For example, move it to where there is a building in the direction you think that the reflection is coming from. Turning it might help. I guess that it should be turned anti-clockwise, although there is no harm in trying clockwise as it might pick up some perminant reflected signal which could be more stable.

What about using the West Kilbride relay? If your aerial is a group one, then you will probably need a replace it with either a group B or wideband.

link to this comment
GB flag

Chris: If the set-top aerial works fine on the Thompson PVR, then I suggest that the problem might be too much signal.

See here:

Freeview signals: too much of a good thing is bad for you | ukfree.tv - independent free digital TV advice

link to this comment
GB flag
Feedback | Feedback
Wednesday 7 December 2011 11:52AM

Garth Prosser: If you're on the Bretch Hill transmitter, then no, they won't ever be available. See here:

Will there ever be more services on the Freeview Light transmitters? | ukfree.tv - independent free digital TV advice

The predictor suggests that reception from Oxford *might* be possible in your post code. Whether it will be at your exact location is another matter, but if you are to look at getting these extra channels, then that would appear to your only option (on terrestrial television).

The transmission power is low from Oxford and will be so until April, so I wouldn't do anything until then.

link to this comment
GB flag
Connecting it all up | Installing
Wednesday 7 December 2011 12:45PM

Bryan Wensley: Using HDMI leads.

link to this comment
GB flag