menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

All posts by Briantist

Below are all of Briantist's postings, with the most recent are at the bottom of the page.


David: Apologies, as the technical parameters for the NZ service are:

MPEG-4 part 10 (H.264, AVC) is used for the video codec and for audio three audio codecs are used:
MPEG-4 HA AAC (up to mono and stereo level 2 bitstream only)
MPEG-1 Layer II/Musicam, audio mode stereo. Sampling rate 32, 44.1 and 48kHz

Only a UK "Freeview HD" box would work, or one of the standard Freeview boxes that happen to have MPEG4, such as BT Vision. Which won't work as you don't have BT Broadband...

link to this comment
GB flag
Feedback | Feedback
Thursday 26 January 2012 6:37AM

Nedbod: Why don't you send them a screen grab?

The heading are there, there's just no data on the pages.

link to this comment
GB flag

Roy: It is possible, but very unlikely.

The multiplex that is on C68 is also on C45 at your location (from the same transmitter) so you might be better doing a manual tune on C45, C42, C60, C39, C55 and C58.

link to this comment
GB flag

Ian Moody: No problems have been reported that I can see at the moment.

link to this comment
GB flag
Film 4
Thursday 26 January 2012 6:57AM

rodney philip: You may have to wait until 27th June 2012 to get Film4 again, but I would give My Freeview box has no EPG, is blank on FIVE, ITV3, ITV4, ITV2+1, has no sound or the channel line up is wrong | ukfree.tv - independent free digital TV advice a go today.

link to this comment
GB flag

Nick Ralph: I would have a look at Freeview intermittent interference | ukfree.tv - independent free digital TV advice if the problem happens from time to time.

link to this comment
GB flag